Search results

I crank it back and forth a few times with it not running until I stop hearing bubbles coming out of the lines, top it off. Start the truck let it idle for a minute or two without touching anything else, top it off. Turn the steering a little bit with it running until the fluid level drops, then...

I've been told that while DEXVI is a direct replacement for DEX3, it has a higher failure rate in this application than the DEX3 did. I ended up using Lucas semi-synthetic ATF, which supposedly works with almost any ATF, and claims to meet or exceed DEX3 specs, as the only stuff I had on hand...

Okay, so got a private message about this, and I'll share the results. Basically, it really should be a 2 person job. One person to keep it topped off every time a big air bubble comes out and the fluid level drops. I apparently just wasn't keeping the fluid level high enough. Last go round I...

So I know this is an old thread, but yesterday I replaced my power steering pump (early style serpentine belt type), along with the 2 lower pressure lines going back to the pump. I can't seem to get the air out of the system. So my question is how much of the system or lines are under...