Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
2 full turns Out from contact. You can turn it in from there 1/4 turn trying to to get a useable signal(chapter 7 in the tech manual). I would pull that one out and make sure it isn’t covered with metal shavings, then check proper install. on the ohm check for the sensor the resistance needs...
Pobe all the holes on the female side and see if one isnt as deep as the others. It is not supposed to happen but sometimes the wire stop in the pin isnt there and the wire gets slid too deep into the pin and crimped. The excess wire then prevemts the male pin in the opposit connector from...
does the hazard light switch light? Do the heater control panel lights work? The heater control light power comes from the hazard switch and the two are joined on the truck side of the P/J 913 connector pair. If those lights are working and the aux panel switch lights are not I would look...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!