Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I have ~25 volts on terminal 3 (and 2 since they are connected internally in the switch) when it is running. I NEVER get 25v on either terminal 5 or 6 when flipping the switch though. Not sure if it is supposed to or not...
Finally messed with this generator some more.... Turns out the bulb for the Battle short switch was burned out, so that switch functions. The generator all the sudden started working yesterday, I hooked it up to the house and ran it a couple hours, now today it is back to not working...
I...
So your AC circuit interrupter switch DOES work? The light just doesn't work for it? (the little light directly above the switch). I don't think I will be that lucky with mine. My test lights do work.
So are you saying that it does send power down to the lugs, but that just the circuit interrupter switch doesn't light up? Seems it will be hard to put a load on it if you are not getting power to the lugs?
I stated that flipping the circuit interrupter and battle short does nothing, as in, with the engine running, you flip the switches and nothing happens.
I've run through the steps in the manual I have and it was worthless, must be the 'beginner' series manual (pretty much just says take it to...
I have an 803a that runs great, but flipping the circuit interrupter switch or battle short switches does nothing, therefore power does not transfer down to the lugs on the front of the unit. The unit reads 25-50% load just running with no load at all, not sure what the deal with that is. I...