Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Exhaust Pipe
chinese copy hx35w turbine outlet flange has 2.5inch so i had to make my own flange for 3inch down pipe. u can use but bolt holes need more bigger bored. i used 3 inch 304 Stainless pipe of Downpipe. and there is no space at where stock-down pipe goes down due to Crossover pipe so...
Turbo Charger
for allowing forced air to make engine cool down. turning up more fuel without Turbocharger can make power increased but Engine could become overheated and melted. in diesel More air means More Cooling
most of 6.2 diesel uses hx35w or GM-X series.
i selected the Chinese copy of...
Oil Feed and Oil Outlet
bearings in a turbo charger needs Oil. i used hx35w copy turbocharger.
there are many parts for oil feed. but i used the Pressure switch port behind intake. 1/4 NPT hardwares were used.
i also installed 1.5mm oil restrictor because i thinks this oil pressure is a little...
Crossover Pipe - the most painful job
actually this post may not be helpful. i just made this with a lots of cutting, welding, mocking.
i used 2.5 inch Stainless 304 PIPE.
A. flanges previously uploaded at Manifold part were used. it is connected to 6.5 diesel turbo manifold at passenger
B...
haha red gasket is just for holding manifold spacer. Without gasket silicon you would get headache from fastening mainfold! Actually just flat surface of mild steel is enough!
Turbo Exhuast Manifold at passenger side
i had been considering to make all custom turbo manifold. it would be so painful to make it so i decided to buy used Humvee 6.5 Turbo manifold at EBAY.
with 6.5 turbo manifold,
Spacer : you have to use Spacer between 6.5 turbo manifold and 6.2 diesel...
Intake
many people use humvee 6.5 turbo intake manifold, but i thought it's expensive. so i decided to make turbo intake tightly fitting to stock NA manifold.
you can use this attached drawing without modification. my Design absolutely consider no effectiveness but only easiness and...
this thread for helping guys looking for turbo 6.2 diesel. Getting 'turbo' is definitely making much more torque. it helps towing car, steep ramp way, etc
i got my m1008 from United States Forces Korea, USFK. there is no other way to buy square body truck except USFK's surplus
my truck usually...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!