Search results

I cut a length of 2"x2" square tubing with 1/4" wall with angled ends so I could get grade 8 bolts up from the bottom into the carrier. The tube was bolted to the original mount from below as well. This cleared the shifter linkage. I cut the hooks off the cab as well. My solargizer panel removes...

The earlier post without the tire in the way is helpful. Here you can see how far to move the stack and the grab handle. The other pic shows the height increase looking at the difference in the hole pattern. I used the old A0 carrier for a ladder carrier that cams into the back bumper so I can...

It will fit with a little work. I will try attaching pictures of what I did to fit an A1 carrier with 395-85-20's on an A0. It needs lifted about 2" higher and the thinner 45 degree support arm needs removed. You also need to rotate the stack out and cut and reweld your grab handle for clearance...