• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

002A Aux Fuel Setup Suggestions

N

n5yzv

Member
84
0
6
Location
Boerne, TX
Seems the breaker, a CH 100A, will handle a 2/0. I have some 2 gauge Aluminum wire. I should only need 10 ft from lug to breaker. The 2 gauge AL that I have may be a little light. So I'll probably look to pick up some 1/0 copper. Should handle anything I want to connect to the house breaker side, should I ever upgrade to a 003a or such.
 
N

n5yzv

Member
84
0
6
Location
Boerne, TX
Well, after more looking, seems 2 gauge AL will be fine. Since I have it, and if there are not anyone against it, I’ll just use that. Those pin and sleeve connectors are nice. Since I’ll be in a stationary setup, I’ll just hardwire.
 
Last edited:
You must log in or register to reply here.
110,766members
165,222threads
2,324,819posts
1,524online users
Top