rsh4364
Active member
- 1,372
- 15
- 38
- Location
- greensprings ,ohio
Since my 1009 has 10bolt 8.5 inch ring and pinions can i pull open carrier and gears from my 8.5 with 373s and put in my diffs?and add powertrax posi,both 28 spline ?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
10 bolt ?
- Thread starter rsh4364
- Start date
rsh4364
Active member
- 1,372
- 15
- 38
- Location
- greensprings ,ohio
after looking into it yes it will work.
Cucvnut
Well-known member
- 3,808
- 69
- 48
- Location
- Carver, Oregon
Yep
rsh4364
Active member
- 1,372
- 15
- 38
- Location
- greensprings ,ohio
cool, there are tons of 8.5 10 bolts in the yards,posi and non posi,as long as donor rear is 2:73 and up all is good,and front and rear centers interchange so posi or locker in front is cheap,and if i really want to upgrade more 88 and later rears had 30 spline axles instead of 28s,they put these 8.5s in everything,impalas,novas,chevelles,camaros....gonna look for 72-81 z28s/transams,most likely posis..