jwaller
Active member
- 3,724
- 19
- 38
- Location
- Columbia, SC
needed a 60A gen for my 5T and the 100A wouldn't fit the 5T so off the 60A came.
What I installed was the 100A gen from a V belt equipped HMMWV. fits good, only mod needed was to shorten the water outlet on the water pump. the one that would have the shutoff valve for the water heater core.
I do need to get a ground cable from a 809 5T as it's a few inches longer and this one is now too short.
What I installed was the 100A gen from a V belt equipped HMMWV. fits good, only mod needed was to shorten the water outlet on the water pump. the one that would have the shutoff valve for the water heater core.
I do need to get a ground cable from a 809 5T as it's a few inches longer and this one is now too short.
