While under my 1083 today installing a reciever hitch i couldnt for the life of me understand what the thin channel with a spring and wire rope that went to some kind od a valve on the round cross member between the 2 rear ales like it did something if the axles traveled too far in one direction it would do something . Any ideas on what it does? Thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
1083 suspension question ?
- Thread starter chucky
- Start date
Ronmar
Well-known member
- 3,899
- 7,565
- 113
- Location
- Port angeles wa
It is a load sensing brake proportioning valve. Adding weight over the rear axle increases brake air applied to match the increase in traction available…
Last edited:
Thanks ! What a contraption !
Ronmar
Well-known member
- 3,899
- 7,565
- 113
- Location
- Port angeles wa
Most pickups I have ever messed with have them in some form…
coachgeo
Well-known member
- 5,150
- 3,466
- 113
- Location
- North of Cincy OH
agree.... in fact my old Datsun trucks used the similar design... just smaller scale.