11.00x20 tire chains

travistodd1

Member
Steel Soldiers Supporter
58
11
8
Location
Camp Verde, Arizona
I have yet to find a deal on a larger set of singles for my truck that I can afford at the time or are close enough for me to pickup. Been thinking of getting some chains for my NDTs. Not a lot out there showing a listing for that size. What have you guys been running? Found these near by and was curious if I could make them work on a 11.00x20?
 

Attachments

davidb56

Well-known member
Steel Soldiers Supporter
690
323
63
Location
Bonners Ferry Idaho
I have yet to find a deal on a larger set of singles for my truck that I can afford at the time or are close enough for me to pickup. Been thinking of getting some chains for my NDTs. Not a lot out there showing a listing for that size. What have you guys been running? Found these near by and was curious if I could make them work on a 11.00x20?
thats what Im running on my 11/20's in the rear. Im running spiked chains in the front from: tirechainsrus.com they cost 300$. the 2247's I bought from CL for 100$ a pair. I have a M35a2 and the tires are 43 inches tall, 11 inches wide on the original 20 inch rims.
 

travistodd1

Member
Steel Soldiers Supporter
58
11
8
Location
Camp Verde, Arizona
thats what Im running on my 11/20's in the rear. Im running spiked chains in the front from: tirechainsrus.com they cost 300$. the 2247's I bought from CL for 100$ a pair. I have a M35a2 and the tires are 43 inches tall, 11 inches wide on the original 20 inch rims.
How did the 2247's fit, toght or loose? Thanks for the info!
 

Karl kostman

Well-known member
Steel Soldiers Supporter
2,062
206
63
Location
Fargo ND
If your looking for chains to just get you by until you find the correct ones you can use some shorter pieces of chain and just wrap them around the tire and through the wheel and bolt the chain together. Granted its a pile of short lengths of chain when your done but it will get you by until you find exactly the right ones!
 

davidb56

Well-known member
Steel Soldiers Supporter
690
323
63
Location
Bonners Ferry Idaho
How did the 2247's fit, toght or loose? Thanks for the info!
I have four links that I dont use, so its a good fit. Im not running NDT's Im running Michelins 11x20, so yours may be loose. If they were tight, you can go to a tractor supply outlet, or what ever its called, and buy a few repair links and add to them for a few $$$.
 

travistodd1

Member
Steel Soldiers Supporter
58
11
8
Location
Camp Verde, Arizona
I have four links that I dont use, so its a good fit. Im not running NDT's Im running Michelins 11x20, so yours may be loose. If they were tight, you can go to a tractor supply outlet, or what ever its called, and buy a few repair links and add to them for a few $$$.
Thanks!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks