12/24 volt fleet style charger with slave port

[Cape Coastie]

So I decided I wanted to have a 24 volt charger handy and found this unit on A-----. Thought I might as well come up.with a way to charge directly to the truck through the slave port and came up with is setup. Haven't tried to jump start or charge yet but it runs my 1/2" robotool on the jump start setting. Hope it holds up and works well.

 

[rchalmers3]

That's a nice solution, Coastie. I'm interested to know where you located the external mount box for the slave port receptacle.

I tried searching for the "Monster battery charger" but all I come up with are small units for providing USB power. Would you please give us the charger part number?
Rick

 

[Andyrv6av8r]

That's a nice solution, Coastie. I'm interested to know where you located the external mount box for the slave port receptacle.

I tried searching for the "Monster battery charger" but all I come up with are small units for providing USB power. Would you please give us the charger part number?
Rick

https://www.walmart.com/ip/55-Amp-P...4406&wl11=online&wl12=113990905&wl13=&veh=sem

 

[papakb]

Here's a link to one that's available but I've never had much luck ordering from Alibaba. Once they get your name you get bombarded by offers for everything in the universe:

https://www.alibaba.com/product-det...?spm=a2700.7724838.2017115.224.507150d1o9Cz6H

 

[Cape Coastie]

Here is the screen shot from Amazon for the charger. The box I used is a heavy duty unit I found laying around at work. It is heavy wall plastic. The cover is just a modified wall cover . Had to drill out the back for the wiring. Like I said before I haven't tried it charging or under a heavy load. Hope it holds up.