12V bulb conversion from 24V bulbs

[Steinmeister]

I want to convert a M1102 trailer lights to 12 volt. Is there a 12V bulb that fits the MV single contact 24V light bulbs?

 

[patracy]

Lotta info here:

http://www.steelsoldiers.com/showthread.php?76647-Bulbs-12-volt-24-volt-trailer-lights-info

 

[doghead]

Isn't that trailer 12v already?

 

[gimpyrobb]

Isn't that a 12v trailer?

 

[patracy]

Isn't that trailer 12v already?

Mine wasn't.

 

[Steinmeister]

If it is I am unaware of that. I am picking it up soon. I have the parts to adapt the trailer pulug to a 4 pin trailer plug.

 

[patracy]

It will work no matter what. The lights just will be dimmer on 12V. Mine had LED corner lights, those are just as bright no matter the voltage. The tail/turn signals on mine were still 24V. They worked, but just dimmer.

 

[hndrsonj]

I'd just install replacement LED bulbs and be able to use it both ways,

 

[doghead]

I just looked at the TM and it does show a 28 volt bulb in the tail light.

 

[KaiserM109]

I'd just install replacement LED bulbs and be able to use it both ways,

Can you give us a source on LED bulb that work both ways? I have an M101A2 that I want to run both ways.

 

[hndrsonj]

Can you give us a source on LED bulb that work both ways? I have an M101A2 that I want to run both ways.

http://www.ledwholesalers.com/store/index.php?act=viewProd&productId=645 Not the ones I have but close. I think mine were $7 each.

 

[doghead]

There are some good threads listed if you scroll down. These should have come up with a search(for this thread title).

One even has a chart.