• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

151 a1

fland 244

New member
10
1
3
Location
Kingston NY
what is minimum fuel pressure this truck will run on..

how to test temperature gauge

how to ID the little metal tags on the wires

truck hasn't run in 30 years it did run spraying gas in carb for a few minutes..

Ok got it running.. compression at 119-120 all cylinders

back of exhaust maafold glows red in 3 min. of run time

Why
 
Last edited:

joel

Member
80
9
8
Location
sioux falls,sd
I think to test temp gauge--take wire off sending unit--ground it to block, the gauge should go to hot--of course this is with the key on/engine running--I don't say with key just on as that might damage something if you have electronic ignition?The TM has the info for everything you ask
 
Last edited:
Top