Hi guys, new to the site. Just bought my first military 6x6.
Problem:
Truck will jump start just fine at the starter. (will not start using the start switch on dash, no dash power)
After running, rev the engine up a bit and the dash powers up gauges and parking brake light comes on (as supposed to, just late).
No matter how charged the batterys are, I can't seem to get the lights, or blackout lights to work.
Do I have a dead battery, or perhaps a wiring issue?
I checked everything behind the dash, traced wires. The protective control box (black pcb next to the washer bottle) clicks when the master disconnect switch is turned on and off.
I just don't get anything when I turn the ignition on.
Any thoughts?
Thanks,![12039222_10205996864814703_7090796281499885568_n.jpg 12039222_10205996864814703_7090796281499885568_n.jpg](https://www.steelsoldiers.com/data/attachments/398/398018-9d4f4247f53d8bee9cb8dabe0c57ebcd.jpg)
Problem:
Truck will jump start just fine at the starter. (will not start using the start switch on dash, no dash power)
After running, rev the engine up a bit and the dash powers up gauges and parking brake light comes on (as supposed to, just late).
No matter how charged the batterys are, I can't seem to get the lights, or blackout lights to work.
Do I have a dead battery, or perhaps a wiring issue?
I checked everything behind the dash, traced wires. The protective control box (black pcb next to the washer bottle) clicks when the master disconnect switch is turned on and off.
I just don't get anything when I turn the ignition on.
Any thoughts?
Thanks,
![12039222_10205996864814703_7090796281499885568_n.jpg 12039222_10205996864814703_7090796281499885568_n.jpg](https://www.steelsoldiers.com/data/attachments/398/398018-9d4f4247f53d8bee9cb8dabe0c57ebcd.jpg)