- 1,506
- 1,174
- 113
- Location
- TN
Honestly, avoid excessive hills, stresses, etc. Keep your speed 35 and under and use back roads if they are less demanding.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
1995 Stewart & Stevenson 1078: New Acquisition Need Input
- Thread starter Phoenix77
- Start date
JD4044M
Well-known member
- 465
- 999
- 93
- Location
- Okanogan, WA. 98840
I have to go up this hill to go home the road is 35-50 mph max. The nice part is this truck has been drove in Florida the original owner only sold it because he needed the tractor model to haul stuff with. He picked this one out for hi personal truck and sell military things also. I still will not go off road don't have to for pictures I live off road only have to pull to the side of the road for them as a back ground. The hill going home is steeper then most mountain passes but only 4 miles to nice driving again. It will be cooler (7
that day 98 degrees today!! I will be careful to learn how it sounds and drives slowly around home. I can do our 10 Mile Loop Road I live on and have every type of test from hills, dirt, gravel and flat asphalt for driving on and no cars in the way.
Phoenix77
Well-known member
- 240
- 543
- 93
- Location
- Greenville, NC
I'm jealous (about the 48 hour part); I submitted my EUC on Wednesday about an hour after my auction closed.
I was extremely fortunate though with my HMMWV EUC experience; it took all of 13 days to get approved - I was hearing horror stories of eight months or more. In the Other Relevant Info box on this EUC, I referenced my approved EUC from March 2019, so hopefully that will earn me a quick "APPROVED" rubber stamp. I think the issue these days though, is how long it takes for them to look at it, not necessary how long they have to think about it.
Last edited:
JD4044M
Well-known member
- 465
- 999
- 93
- Location
- Okanogan, WA. 98840
Well tomorrow morning I get mine. Not sure I would enjoy waiting for we will get to it one day don't worry???
- 7,716
- 19,766
- 113
- Location
- Charlotte NC
Early congratulations on getting your truck tomorrow. Don't forget to snap lots of pics. Especially while it is still on the trailer and as she comes off...
As far as "EUC Speed" is concerned, you have to remember - this is the same government that you once served - and you know how they can be about making a decision. ADD into that equation a civilian organization interfacing with a government agency and you know that nothing is ever going to happen quickly.
I particularly like the idea that Phoenix77 was able to reference a previous EUC on a new purchase. Opinions are like other parts of the anatomy - where everyone has one - but previous approval should move an application to the top of the list. Again, IMO.
JD4044M
Well-known member
- 465
- 999
- 93
- Location
- Okanogan, WA. 98840
I charged up my Camera Battery I have had it go dead at the wrong time to many times! The Military helped me learn "Hurry up and wait" Today were in a Red Flag Warning up to 50 MPH Gusts and in the 90's There working on some big fires South of me today to beat the high winds later on!!
JD4044M
Well-known member
- 465
- 999
- 93
- Location
- Okanogan, WA. 98840
To bad that fire ended up burning all around us and it went to my Mother in Laws cause my place was on fire! Saved it and the truck is home and being enjoyed!!
JD4044M
Well-known member
- 465
- 999
- 93
- Location
- Okanogan, WA. 98840
Been home for a while and I started a Photo Album documenting things done. Photo Album Link Now the fun begins cause the weather has warmed up and I can play more!
- 464
- 267
- 63
- Location
- Seville, OH
You bought this to resell?
JD4044M
Well-known member
- 465
- 999
- 93
- Location
- Okanogan, WA. 98840
Yes but not right away. I really enjoy the truck but turning 70 in Oct and finding having some medical issues working on it is not easy to do anymore! Every thing is big and heavy to deal with. But having owned one is a blast to me even if only for a while.
Great pictures!
- 573
- 1,284
- 93
- Location
- Chesterfield, Mi.
Welcome to the hobby and this site. You will find a wealth of knowledge here. There is a new forum on the site, Rv Camper Conversions. There are some very interesting builds going on...
Third From Texas
Well-known member
- 2,766
- 6,498
- 113
- Location
- Corpus Christi Texas
Might try Scott DeWitt. He's in Corpus. Closest one I know of but there should be no shortage of takeoffs.
JD4044M
Well-known member
- 465
- 999
- 93
- Location
- Okanogan, WA. 98840
Finely opened up a BIG Multi TM Manual for the 1995 M1078A0 completely and what a wealth of information I have been missing!@! Did see how the Cab is hooked up to lift it Hydraulically and now I understand how it and a bunch of other things work. Nothing on taking the Latch Apart. I got my socket and the time to take it apart tomorrow to see what happen to it. Copied the 5 page PDF File on the Fuse Box and put it under the Cover. I did see that when they showed a 1995 M1078AO in the TM the Tail Lights were the same as mine are in the picture. Interesting must have made the change after the TM was printed??
Third From Texas
Well-known member
- 2,766
- 6,498
- 113
- Location
- Corpus Christi Texas
Interesting bumperettes.
I'd not seen that design before.
I'd not seen that design before.
ramdough
Well-known member
- 1,554
- 1,729
- 113
- Location
- Austin, Texas
Try [mention]fuzzytoaster [/mention] he is in Ft. Worth.
Sent from my iPhone using Tapatalk