2-pin accessory connector on deuce - interchangeable connectors?

[Mike944]

2-pin accessory/slave connector on deuce - interchangeable connectors?

I have a '71 deuce, with the 2-pin jump/accessory/slave power connector on the side, instead of the newer coaxial NATO connector.

I'm looking to find a mating connector for it.

From looking at the mil-spec connector charts, looks like a "36-3" connector might work, with only 2 pins installed. I found a connector reasonably inexpensive (but too much to just chance it) Has anyone tried this? Where can I get an inexpensive connector that mates with it?

 

[fsearls92]

I have a NOS upgrade assembly for the NATO single pin slave plug for $40 in my classified add. That way you wouldn’t need an adapter. Just replace and good to go. Pm me if interested

 

[fsearls92]

https://www.steelsoldiers.com/showthread.php?176746-M35a2-and-misc-parts

 

[dmetalmiki]

I am puzzled, Why do you need a NATO co-axial connector?. All U.S. Trucks have two pin plugs and sockets. And thus American Two Pin Jumper cables. So, (In my case) I have to use a NATO converter to go from my (U,K, Truck) CO-Axial Jumper lead to the American Two pin truck socket. TO USE a U.K. NATO jumper cable.
However. I have BOTH American 2 pin jumper Cables, And, Co-Axial single pin British / NATO jumper cables.
I do however have NATO Co-Axial Single pin to U.S. Two pin Adaptors. ()6 of for all my trucks, so I can use either jump cable,
(preferring the better NATO heavy duty TANK long jumper cables).

 

[dmetalmiki]

(Strange..)..I have just checked all the 'known' sites and can not find the adaptors We have anywhere. Yet they came with the M62 wrecker (4 off)..and two other trucks. I will take a picture of them tomorrow.

 

[Mike944]

I don't NEED to upgrade to a NATO connector, I just want a mating pair of something, so I can actually use the port.

I figure I already have 1/2 of the connector pair. I'd rather find a connector half that mates with it, hence the question, rather than having to replace the connector on the truck, plus still having to buy a cable-side connector

 

[cjcottrill]

(Strange..)..I have just checked all the 'known' sites and can not find the adaptors We have anywhere. Yet they came with the M62 wrecker (4 off)..and two other trucks. I will take a picture of them tomorrow.

I just checked the big auction site. Type “military slave cable adapter”. There are some available. I have one in each of my trucks, I don’t think I have ever paid more than $10.00 each.
Sorry meant to send it to the OP.

Sent from my iPhone using Tapatalk