Spagman
New member
- 18
- 1
- 1
- Location
- Branchburg, NJ
Hello,
I am trying to source both halves of an electrical connector that is used in a few locations on the 6.5L engine harness. This connector is used in the interface to the tachometer sending unit and also on the crank sensor at the front of the engine on the drivers side. It is a 2 position connector that is keyed (via internal step) between the male and female halves. Pictures of both connector halves are attached.
My goal is to make a y cable to splice in other signal connections without cutting into the existing truck harness. I checked with Erik's Military Supply and came up short.
![20191026_125657_HDR.jpg 20191026_125657_HDR.jpg](https://www.steelsoldiers.com/data/attachments/537/537207-2b0adc7d4155c787942d258caa3780fb.jpg)
![20191026_125711.jpg 20191026_125711.jpg](https://www.steelsoldiers.com/data/attachments/537/537208-56474b3689b6bbc5b8c8e83489607e7a.jpg)
![20191026_125602.jpg 20191026_125602.jpg](https://www.steelsoldiers.com/data/attachments/537/537209-2fc1f0bb91c1bcd16cc7908b2294ca2c.jpg)
![20191026_125654_HDR.jpg 20191026_125654_HDR.jpg](https://www.steelsoldiers.com/data/attachments/537/537210-6bbd6f2d448b13cd716f65da3a6ee89a.jpg)
Appreciate any help you can provide locating these connectors.
Thanks.
I am trying to source both halves of an electrical connector that is used in a few locations on the 6.5L engine harness. This connector is used in the interface to the tachometer sending unit and also on the crank sensor at the front of the engine on the drivers side. It is a 2 position connector that is keyed (via internal step) between the male and female halves. Pictures of both connector halves are attached.
My goal is to make a y cable to splice in other signal connections without cutting into the existing truck harness. I checked with Erik's Military Supply and came up short.
![20191026_125657_HDR.jpg 20191026_125657_HDR.jpg](https://www.steelsoldiers.com/data/attachments/537/537207-2b0adc7d4155c787942d258caa3780fb.jpg)
![20191026_125711.jpg 20191026_125711.jpg](https://www.steelsoldiers.com/data/attachments/537/537208-56474b3689b6bbc5b8c8e83489607e7a.jpg)
![20191026_125602.jpg 20191026_125602.jpg](https://www.steelsoldiers.com/data/attachments/537/537209-2fc1f0bb91c1bcd16cc7908b2294ca2c.jpg)
![20191026_125654_HDR.jpg 20191026_125654_HDR.jpg](https://www.steelsoldiers.com/data/attachments/537/537210-6bbd6f2d448b13cd716f65da3a6ee89a.jpg)
Appreciate any help you can provide locating these connectors.
Thanks.