200 amp alternator question

[ZZZZZZCOBRA1]

I have a 200 amp alternator. I read on these they have a 14 volt out that can charge a third battery. If I wanted to add a third battery to run a winch how do I know if my 200 amp alternator can do it? I do not see where I would hook too.

 

[Action]

That 14v tap normally hooks to the rear battery.

 

[ZZZZZZCOBRA1]

Where do you hook to on the alternator for a third battery?

 

[ZZZZZZCOBRA1]

Here is my alternator. Just trying to see where i would tap into for the 14 volts unless this alternator does not have that ability.

 

[juanprado]

That looks like the 100amp not the 200.

 

[ZZZZZZCOBRA1]

Well I am not an expert on these but the alternator tag says 200 amp and 28 volts so that is what I am assuming is correct. Would you agree?

 

[juanprado]

That must be an early model is my guess. The latest look different and have a different regulator.

 

[Action]

Well I am not an expert on these but the alternator tag says 200 amp and 28 volts so that is what I am assuming is correct. Would you agree?
View attachment 730040

It also reads "generator". The normal 200 amp dial voltage have a stud clearly labeled 14v.

 

[mechanicjim]

"generator" is just the Army way of naming it. that's an alternator it just not one of the dual voltage ones. most of the dual voltage models are made by C.E.Niehoff this is a Leece-Neville and its a single voltage model.

 

[ZZZZZZCOBRA1]

Thanks guys that kind of answers that question!

 

[HUNvee]

My 200 amp:

and the 14V connection: