2014 MVPA National - Louisville, KY BUY/SELL/TRADE thread

[papabear]

PB, What do the lights look like? View attachment 499774

Yes, those will work for what I want them for. Also need several front marker lights.

 

[zout]

I have a K-19 trailer for sale BUT - its is being utilized for some home brewing equipment and its not for sale NEVER said what type of equip so don;t go jumping to conclusions.

 

[1crook]

Clinto and I are attending the National Convention as vendors this year. We will have a 25’ x 20’ trailer space. I will only bring some of the Tan and Camo M35A2 Cargo Cover Kits seen here:


http://www.steelsoldiers.com/showth...rgo-Cover-Kits-for-M35A2-M35A3-M35-M35A1-M211


http://www.steelsoldiers.com/showth...rgo-Cover-Kits-for-M35A2-M35A3-M35-M35A1-M211


if I have pre-paid orders. I have limited space on the trailer and will be bringing lots of other stuff, so please speak up if you want one of these kits. This is a good way to save money on shipping, they are very heavy, 225lbs.


I will also have M35A2 Master Cylinders (these fit any of the M44 series deuces with single circuit brakes), brand new GI surplus, in the box for $50 each. Here’s what they look like:






I will have my brand new M-series side marker lights, most red but a few amber lenses. These are brand new, American made lights by Aurora Cord Company. Very nice pieces. 24V, incandescent. $8 each for the red and the amber lenses will be $12. Brand new in the box. Will also have brand new red lenses for $3. Pictures of the clearance light assemblies can be seen in my post here:


http://www.steelsoldiers.com/showthread.php?117385-Military-Clearance-Lights-Red-and-Amber-Lenses



Brand new Red Dot A/C kits for the 915, 916, 917 and 920 series trucks. Can be retrofitted to other models like Deuce, 5 ton, etc with some fabrication for general items like brackets, etc. Show special price of $500. You know you want one, it’s like 900° outside.




Brand new, GI surplus M44 series (Deuce, M35, etc.) dogbones. I have 2 of these, $125 each.




IR lights. These are the IR lights mounted in the armor headlight housings. They have a low beam and a high beam and can be converted into headlights (or spotlights, reverse lights, etc.) if you get a clear lens and swap it out. Very nice units, NOS in the box. $50 each.




Armor headlights with IR light. This is the combination headlight and IR light that is mounted on lots of armored vehicles like the M60A3. Brand new GI surplus. $75 each.



Dash light lenses, in red. The traditional M-series dash light lens. NOS, GI surplus. Show special $2 each, 3 lenses for $5.


Deuce multifuel engine stop cables. Brand new GI surplus. $25 show special.




Cougar, JERRV, MRAP, rearview mirror assemblies, $30 each or $50 per pair show special.





M939 Spare Wheel Clamp $40 each. I only have three of these. See item circled item in diagram.





We are looking for:

NOS BFS (DOT5) brake fluid by the gallon.

M37 waterproof distributor

 

[clinto]

We are looking for:

NOS BFS (DOT5) brake fluid by the gallon.

M37 waterproof distributor

Clintogf neglected to tell you guys she is looking for a DUKW. I can't afford one right now, but she's really interested in one.

I have 6 DUKW rims and 3 M38A1 hoods I can deliver to the convention but they have to be prepaid. I don't have room to bring them back, so I can't bring them with me if I don't have a guarantee that they don't need a ride home.

DUKW rims: http://www.steelsoldiers.com/showthread.php?122442-6-(six)-complete-DUKW-rims

M38A1 hoods: http://www.steelsoldiers.com/showthread.php?122513-M38A1-hoods-x3-75-each

 

[1crook]

Clintogf neglected to tell you guys she is looking for a DUKW. I can't afford one right now, but she's really interested in one.

I have 6 DUKW rims and 3 M38A1 hoods I can deliver to the convention but they have to be prepaid. I don't have room to bring them back, so I can't bring them with me if I don't have a guarantee that they don't need a ride home.

DUKW rims: http://www.steelsoldiers.com/showthread.php?122442-6-(six)-complete-DUKW-rims

M38A1 hoods: http://www.steelsoldiers.com/showthread.php?122513-M38A1-hoods-x3-75-each

Projecting your wishes onto me again!!! You better hang onto those DUKW rims because that is the closest you are getting to a DUKW. Now you will just need to build a chassis for it.

 

[swindad2]

Anyone have one of the military tire dollies for a reasonable price. What's the odds it would fit in the trunk of a car? I live just off I65 in Franklin, KY. A SS member in Florida had one for $175 a while back, but shipping would have been a killer. Getting ready to start pulling wheels, trying to find the easiest method.

 

[gimpyrobb]

Just buy a pallet jack!

 

[swindad2]

Thought about that. If I can find a good used one locally.
Edit. Looks like HF has one for $260 if I can't do better.

 

[123mack]

I have one I could bring up. $70.00, needs a jack. I'll be coming up I-65 Wednesday.

 

[swindad2]

Sent you a PM. Thanks. Larry.

I have one I could bring up. $70.00, needs a jack. I'll be coming up I-65 Wednesday.

 

[cwc]

Is anybody coming through NM on I-10 and could bring a tire from Las Cruces (40 miles west of El Paso) to Louisville?

Thanks, Chris

 

[MWMULES]

Picking up 6 LMTV/MTV seats, one NOS MRAP wheel with a XZL365/85 20 and one tailgate glass for a M1009

 

[Scar59]

Loaded a M146 full of goodies and cool stuff yesterday. Artic heaters, M939 hard top (NOS) FMTV bumper, M35 steering gear (NOS), M939 fuel tank (NOS), FMTV cargo cover kit (NOS), M35 cargo cover kit (NOS) HUMMWV cargo kit , lot of kits and accessories, still loading a smaller trailer today. See everyone later this week.
JC

 

[zout]

Swindad - get a plastic mudflap off a truck - get a squirt bottle of oil - get the tire just off the ground and slide the tire in and out - that is a survivors method. By the time ya jerk on that wheel jack your tire would have already been out with the flap method.

 

[Junkyard Wars Crusher]

WANTED: Scepter Plastic Fuel Cans !



For Sale: Bumperettes, fair condition. $10 for pair. (will only bring if requested)



For Sale: Deuce hood, Really clean, but really dented. $10. (will only bring if requested)

 

[Scar59]

Swindad - get a plastic mudflap off a truck - get a squirt bottle of oil - get the tire just off the ground and slide the tire in and out - that is a survivors method. By the time ya jerk on that wheel jack your tire would have already been out with the flap method.

Larry,
if you can't find a descent wheel dolly, find a tire fork (pickle fork) I got one on line for $60. They work great on the 9x20s. no mess.
JC

 

[swbradley1]

Larry,
if you can't find a descent wheel dolly, find a tire fork (pickle fork) I got one on line for $60. They work grat on the 9x20s. no mess.
JC

Doesn't look like it will hold much.

http://www.qcidirect.com/long-reach...-pickle-fork&gclid=COHI0NDXkL8CFQMuaQodp68AsA

 

[swindad2]

Doesn't look like it will hold much.

http://www.qcidirect.com/long-reach...-pickle-fork&gclid=COHI0NDXkL8CFQMuaQodp68AsA

I needed a good laugh today. That's a good one.

 

[Scar59]

Doesn't look like it will hold much.

http://www.qcidirect.com/long-reach...-pickle-fork&gclid=COHI0NDXkL8CFQMuaQodp68AsA

Now I'm craving a big ol' dill pickle and I'm suppose to watch the salt....

 

[Junkyard Wars Crusher]

Update to my Custom Stencil post above:

I made a bunch of these for guys at the Haspin Rally and decided on a new Special Pricing offer-

$10 for the first sheet and just $5 for each additional sheet.
You can easily do a whole deuce for $20.