- 3,752
- 1,529
- 113
- Location
- North Carolina - FINALLY !
As soon as I get confirmation on a few details we'll get one going.Is it too early to start a 2018 thread?
I was contemplating doing it myself, but didn't wanna step on any toes.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
2017 Denton NC MV Rally April 13, 14, 15th
- Thread starter tacticalmike
- Start date
- Status
- 850
- 470
- 63
- Location
- blairsville ga.
CGarbee
Well-known member
- 2,473
- 562
- 113
- Location
- Raleigh, NC
Great news!
I am really interested in hearing what the confirmed dates of the event are going to be. I had blocked out one week on my schedule based on some info that I heard from one person, then another person recently posted a scan of a flyer on another forum that indicated the event was being held on a different week (that I can't make due to a mandatory work trip...).
LanceRobson
Well-known member
- 1,638
- 206
- 63
- Location
- Pinnacle, Stokes County, NC
Life hands you some strange coincidences sometimes. I was shuttling trailer loads of stuff from our NY farm to our new NC place back when the last one was held and have been thinking about the 2018 Farm Park event. While confirming my spaces for the NJ MTA show in Augusta, NJ yesterday I mentioned to my wife that I hoped Denton wouldn't conflict with an already scheduled trip.
I had to drop an M939 rim off at Jim Henry's this morning from a NY SS member that I've had since the Gilbert, PA show in September and took a roundabout way home just to see more of NC. I wound up driving down NC 109(?) and spotted a steam tractor with a sign for the SE Thresher's Reunion. I doubled back to get a picture as we used to have a 1908 Waterloo steam tractor on the farm and I figured our youngest son would be interested. As I pull up to the tractor I spot a sign showing the the way a mile and a half to Denton Farm Park. So I went and drove through the place. It's quite a setup.
I'm looking forward to seeing the dates too. It'll be about an hour and half from home (Pinnacle, Stokes County) which will be at least 2-1/2 hours closer than any show I've ever been too. And I'll help out where I can.
If it helps for planning;
The NJ MTA show in Augusta, NJ is 20-21 April.
Aberdeen, MD is 10-12 May.
Findlay, OH is 18-20 May.
The MVPA national convention is in KY 12-14 June.
Lance
I had to drop an M939 rim off at Jim Henry's this morning from a NY SS member that I've had since the Gilbert, PA show in September and took a roundabout way home just to see more of NC. I wound up driving down NC 109(?) and spotted a steam tractor with a sign for the SE Thresher's Reunion. I doubled back to get a picture as we used to have a 1908 Waterloo steam tractor on the farm and I figured our youngest son would be interested. As I pull up to the tractor I spot a sign showing the the way a mile and a half to Denton Farm Park. So I went and drove through the place. It's quite a setup.
I'm looking forward to seeing the dates too. It'll be about an hour and half from home (Pinnacle, Stokes County) which will be at least 2-1/2 hours closer than any show I've ever been too. And I'll help out where I can.
If it helps for planning;
The NJ MTA show in Augusta, NJ is 20-21 April.
Aberdeen, MD is 10-12 May.
Findlay, OH is 18-20 May.
The MVPA national convention is in KY 12-14 June.
Lance
- 3,752
- 1,529
- 113
- Location
- North Carolina - FINALLY !
The dates are 25-29 Apr. Details of events to come soon.
Lance sorry i missed you at Jim's. Wheel's wife and I were there this afternoon.
Lance sorry i missed you at Jim's. Wheel's wife and I were there this afternoon.
LanceRobson
Well-known member
- 1,638
- 206
- 63
- Location
- Pinnacle, Stokes County, NC
I left there about 1:15 or so. Jim wasn't there so I only stayed a few minutes to see what he had laying out in the yard as it's been 4-5 years since I was last there.
Lance
CGarbee
Well-known member
- 2,473
- 562
- 113
- Location
- Raleigh, NC
I was afraid of this...
That's the week that I will be in Idaho...
In twenty years, this will be only the third time that I have missed the NC Rally (and the second in a row...).
So, once again, my MKT will not be on-site...
michigandon
Well-known member
- 1,442
- 82
- 63
- Location
- Wake Forest, NC
Bummer!
nclandcruisers
New member
- 9
- 0
- 0
- Location
- Ga
Sent from my iPhone using Tapatalk
1984 Manual 4-speed FJ60
and
Friend of a M925A2
Friend of a M35A2
nclandcruisers
New member
- 9
- 0
- 0
- Location
- Ga
Sent from my iPhone using Tapatalk
1984 Manual 4-speed FJ60
and
Friend of a M925A2
Friend of a M35A2
- 518
- 179
- 43
- Location
- Stoneville, NC
Dangit!
- 850
- 470
- 63
- Location
- blairsville ga.
Well I didn't know if I should thank you for your post or not.
I not only miss the MKT but hanging out with you.
As you guys know I am willing to try to cover for the MKT if wanted but would ask for some input, maybe a loan of a few items and a little help to try to do better than last year.
Give me a couple days to get my thoughts together and after an official Event thread is started I will start a separate thread as to not over populate the general info thread.
So who ever starts the thread please let me know so I can reserve one of the first couple post
Just a teaser....
LanceRobson
Well-known member
- 1,638
- 206
- 63
- Location
- Pinnacle, Stokes County, NC
I'm gearing up to start cutting steel and welding up a trailer mounted smoker but it won't be done for the Denton event. I can bring a big electric/wood cabinet type one though. And I have a big high powered turkey fryer style burner if that helps.
Lance
Lance
driver200150
Member
- 74
- 7
- 8
- Location
- Broadway NC
Go ahead if you want to. Perfectly fineIs it too early to start a 2018 thread?
I was contemplating doing it myself, but didn't wanna step on any toes.
- 3,752
- 1,529
- 113
- Location
- North Carolina - FINALLY !
- Status