2018 Georgia Military Vehicle Rally buy-sell-trade

zout · Oct 4, 2018

I need to purchase a full set of M37 headlights. Not interested in GOLD pricing....Ill be turning them into 12v for the truck I am building. Will be at the rally with the CAMO group.

73m819 · Oct 4, 2018

WANT
Looking for a working metal temp gauge/sender, looks do not matter as long as it works and the lens is clear. NO PLASTIC CRAP
looking for a 809 series front winch drive shaft, NOT a wench drive shaft (already have one) a front WINCH driveshaft.
Looking for a 939 steering wheel, does not have to be new, a few minor cracks ok.
Looking for TWO inner wheel seals for a old 105,
Looking for 939 mirror with U shaped mounting bracket,
Looking for THREE 939 round mirrors,
Looking for 939a2 alt.
looking for 939a2 starter,
looking for a full rear set of thimbles/thimble nuts (20L/20R)
Looking for brake lock valve for a 39/809 wrecker

FOR SALE

Have for sale 1991 931a1, straight from GL auction 4 years ago (just sat in storage), I replaced the alt, tail light, broken L mirrow, batteries, 4 flat tires. The trans has dexron, engine oil so clean that you can read the markings on the stick though the oil, ALL the gauges work, truck shifts very smooth, all lights work but head lights (power to the lights. no seen leaks (air or water), holds air over night, drive line looks like it was greased a month ago. After sitting at least 4 years plus, it STARTED on about the first revaluation like I had just shut it off.
Asking $5000 with title. Pictures in a day or two. Think sold BUT you never know till you wave good by.

Have for sale TWO 939a2 wheels with good tires $100 each.
Have for sale FIVE 939a2 wheels with BAD tires, some can not be used, others may be fixable, $50 each
Have for sale 939 5th wheel and ramps

TRADE
Anybody going to singles want to trade a set (20l,20r) of single rear lug nuts for a set of thimbles and thimble nuts (20l,20r of each), this is taken care of.

4XDesign · Oct 4, 2018

73m819 said:
WANT
Looking for a working metal temp gauge/sender, looks do not matter as long as it works and the lens is clear. NO PLASTIC CRAP
looking for a 809 series front winch drive shaft, NOT a wench drive shaft (already have one) a front WINCH driveshaft.
Looking for a 939 steering wheel, does not have to be new, a few minor cracks ok.
Looking for TWO inner wheel seals for a old 105,
Looking for 939 mirror with U shaped mounting bracket,
Looking for THREE 939 round mirrors,
Looking for 939a2 alt.
looking for 939a2 starter,
looking for a full rear set of thimbles/thimble nuts (20L/20R)
Looking for brake lock valve for a 39/809 wrecker

FOR SALE

Have for sale 1991 931a1, straight from GL auction 4 years ago (just sat in storage), I replaced the alt, tail light, broken L mirrow, batteries, 4 flat tires. The trans has dexron, engine oil so clean that you can read the markings on the stick though the oil, ALL the gauges work, truck shifts very smooth, all lights work but head lights (power to the lights. no seen leaks (air or water), holds air over night, drive line looks like it was greased a month ago. After sitting at least 4 years plus, it STARTED on about the first revaluation like I had just shut it off.
Asking $5000 with title. Pictures in a day or two. Think sold BUT you never know till you wave good by.
View attachment 743801 View attachment 743802 View attachment 743803 View attachment 743804 View attachment 743805 View attachment 743806 View attachment 743807 View attachment 743808

Have for sale TWO 939a2 wheels with good tires $100 each.
Have for sale FIVE 939a2 wheels with BAD tires, some can not be used, others may be fixable, $50 each
Have for sale 939 5th wheel and ramps

TRADE
Anybody going to singles want to trade a set (20l,20r) of single rear lug nuts for a set of thimbles and thimble nuts (20l,20r of each), this is taken care of.

Please let me know if I need to get you a deposit for the truck I am 100% buying it and don't want it to get away.
Thanks

73m819 · Oct 4, 2018

4XDesign said:
Please let me know if I need to get you a deposit for the truck I am 100% buying it and don't want it to get away.
Thanks

Sir, I am old fastened, I take a person at there word the first time, there is NO second time, the price goes up and at least 50% NON returnable up front. I give my word, that is it, this all makes a very happy deal.

Coffey1 · Oct 4, 2018

Ron be nice to Johnathan he's my buddy.

Smokinyoda · Oct 4, 2018

Few things I have to sell, only bringing if spoken for.
Also if anyone coming to the rally through Charleston WV area and has the room I need top, bows, and sides from m101 trailer brought south.

Old style hmmwv jack with handle. Works but could use some lube. $10 SOLD to patracy
Newer style hmmwv jack in bag with tools. $40 SOLD to Gunnermac
LMTV boarding ladder $50
7 LMTV fiberglass bed rails $10 each
LMTV rear brake cans. Came off a new axle so supposedly never used. $150 for both. SOLD to profo
Wrecker equipment. 3 spades, 2 single and 2 double line snatch blocks, wiffle tree, plus everything else pictured in the 2 pics. $800
Pioneer tool rack with tools. Not sure what it fits but looks new $75 SOLD to SCM35A2
4 M37/M101 wheels with dry rotted tires $100

Streamline · Oct 4, 2018

Due to some recent issues with my Truck, I'm having to look at buying another Truck or car.
Due to this I'm reluctantly selling both my M101 Trailers.

I'm Asking $1600.00 per trailer.

First M101 Trailer has a Very Rare A2 Aluminum Body, so no rust.
Also has a Rare Hard Shell attached, on a A1 Frame with the M37 wheels.
Both Wheels are in newer shape!

Second M101 Trailer has a Galvanized Body, so no rust.
This trailer has a working surge break, also has the Chevy Wheels with a spare.
All three tires are in newer shape.

I will have both trailers at the rally to be looked over. Unless one or both sell before they rally.
I have posted these trailers for sale on other sites.

Thanks

patracy · Oct 4, 2018

Smokinyoda said:
Few things I have to sell, only bringing if spoken for.
Also if anyone coming to the rally through Charleston WV area and has the room I need top, bows, and sides from m101 trailer brought south.

Old style hmmwv jack with handle. Works but could use some lube. $10
Newer style hmmwv jack in bag with tools. $40
7 LMTV fiberglass bed rails $10 each
LMTV rear brake cans. Came off a new axle so supposedly never used. $150 for both.
Wrecker equipment. 3 spades, 2 single and 2 double line snatch blocks, wiffle tree, plus everything else pictured in the 2 pics. $1000
Pioneer tool rack with tools. Not sure what it fits but looks new $75
4 M37/M101 wheels with dry rotted tires $100

I'll take the HMMWV jack.

Smokinyoda · Oct 4, 2018

Few more things.

Rusty crusty jack from 816, still works. $5 SOLD to 73m819
Nice jack form M37. $20 SOLD to SCM35A2
MKT toolbox for M37 with period correct tools. $75
Generator transfer switch. $75
Field telephone case, have 2 they look new. $20 each
Many different sized Pelican and Hardigg cases. PM for size/price list.

SCM35A2 · Oct 4, 2018

Smokinyoda said:
Few things I have to sell, only bringing if spoken for.
Also if anyone coming to the rally through Charleston WV area and has the room I need top, bows, and sides from m101 trailer brought south.

Old style hmmwv jack with handle. Works but could use some lube. $10
Newer style hmmwv jack in bag with tools. $40
LMTV boarding ladder $50
7 LMTV fiberglass bed rails $10 each
LMTV rear brake cans. Came off a new axle so supposedly never used. $150 for both.
Wrecker equipment. 3 spades, 2 single and 2 double line snatch blocks, wiffle tree, plus everything else pictured in the 2 pics. $1000
Pioneer tool rack with tools. Not sure what it fits but looks new $75
4 M37/M101 wheels with dry rotted tires $100

I'd like the Pioneer tool rack with tools & the nice jack form M37 if not spoken for. Donny

Gunnermac · Oct 5, 2018

I'll take any of the hmmwv jacks would prefer the new style if its still available.

Mac

papabear · Oct 5, 2018

glcaines said:
I have added an NOS oil cooler for M35A2 multifuel that includes all gaskets and o-rings needed. I will donate the turret armor to the auction if I haven't sold it ahead of time.

Gary I may be interested in the ATV wagon. Is that it in the pic or can you post a pic of the one you have?

TaylorTradingCo · Oct 5, 2018

Shackle

I need 1 shackle to match this one, uses a 1" pin, like the Deuce front bumper shackle, only straight, mine has the squared off sides rather than fully rounded.

TheBigOldSarge · Oct 5, 2018

Hey folks; I will be bring to sell the following items. Will Fit M923 and M35 on some items. See me at the rally for $$$. I will be in the same spot. Upper left back on the hill up front. Clint has seen all my stuff and I do believe he will vouch for me. In the Box are L/R lower fender (bolts to the cab not to the Hood) / Muffler and the exhaust Pipe that bolts to it. Clamps that are used to bolt them together. / One NOS & One used Right, drivers side Door / One NOS Shell and One Used Left, passenger side door. / Glass NOS for Left & Right side 1 each. Plus window regulate & Latching rod, all rubber and window felt for both sides. / Aluminum floor broad (3 parts) and metal reinforcements for the door & cab and windshield. Yes it is just part of a Up Armored kit. / Every Thing to do a complete Axle job, meaning all replacement parts for all 3 axles and 6 wheels. All parts to do a drive shaft seal replacement. / Trans filter & gasket. / Air brake diagrams large & small / Oil Filter + Fuel Filters & that small screen that is in the fuel pump with filter. / Power steering filter & gaskets / Tie Rod Ends / All engine coolant hoses / Engine & Trans Oil / Trans Temp relay (one the screws into trans) / Tow Chains and Shackles many different sizes / used air filter case and fuel lines that go to the body mount fuel filter / The Kit to relocate the old fuel filters / 2 batteries / 2 jump cables for dead batteries / left side long Mirror / Hard Top rubber seal for the cab. / side mount storage boxes / Trailer with complete set of MRAP boxes on it. Military trailer changed to be tow by Reg Pick-up Truck. Plus a boat load more parts. 3 sets of troop seats for FTMV Cleaning out my shop. PM or call 770

-307-6804

sandcobra164 · Oct 5, 2018

BigOldSarge, please bring a case of fuel filters for the M809 / M939 trucks and I'll take them off your hands for the right price.

mkcoen · Oct 5, 2018

Anyone heading to the rally from TX that could tow a M116 for a little gas money?

timntrucks · Oct 6, 2018

if you could get it to la i could tow the 116

Streamline · Oct 6, 2018

Large Transport Cases

I have 2 now 3 Large Folding Shipping Pallet Tri-walls. Heavy Duty!

Asking $75 each or $125 for the pair or $170 for all 3. SOLD....SOLD...SOLD

I found a 3rd Tri-wall today so if someone wants 3 or two sell before I leave for rally I will clean this one out and bring it.
If not I may just leave it so I don't have to clean it out.. :0) SOLD....SOLD...SOLD

I have two Large Hardigg Cases Good Shape!

Asking $100 each or $150 for the Pair
Also have many other Pelican and Hardigg cases that Im bringing.
Many different sizes ranging from Small to Large, ranging from $40 to $150

glcaines · Oct 6, 2018

papabear said:
Gary I may be interested in the ATV wagon. Is that it in the pic or can you post a pic of the one you have?

Here are photos from the actual trailer. The trailer has electric brakes and an electrically actuated dump bed. You would have to wire up the controller, which is included, for the electric brakes and dump function. I'm going to bring the trailer to the GA Rally along with an ATV so you can see it in action.

73m819 · Oct 6, 2018

WANT
Looking for a working metal temp gauge/sender, looks do not matter as long as it works and the lens is clear. NO PLASTIC CRAP
looking for a 809 series front winch drive shaft, NOT a wench drive shaft (already have one) a front WINCH driveshaft.
Looking for a 939 steering wheel, does not have to be new, a few minor cracks ok.
Looking for TWO inner wheel seals for a old 105,
Looking for 939 mirror with U shaped mounting bracket,
Looking for THREE 939 round mirrors,
Looking for 939a2 alt.
looking for 939a2 starter,
looking for a full rear set of thimbles/thimble nuts (20L/20R) Taken care of
Looking for brake lock valve for a 39/809 wrecker
Looking for 4 pair of BDUs 38x32, anything but tan, camo green perfectible

FOR SALE

Have for sale 1991 931a1, straight from GL auction 4 years ago (just sat in storage), I replaced the alt, tail light, broken L mirrow, batteries, 4 flat tires. The trans has dexron, engine oil so clean that you can read the markings on the stick though the oil, ALL the gauges work, truck shifts very smooth, all lights work but head lights (power to the lights. no seen leaks (air or water), holds air over night, drive line looks like it was greased a month ago. After sitting at least 4 years plus, it STARTED on about the first revaluation like I had just shut it off.
Asking $5000 with title. Pictures in a day or two. Think sold BUT you never know till you wave good by.

Have for sale TWO 939a2 wheels with good tires $100 each. SOLD
Have for sale FIVE 939a2 wheels with BAD tires, some can not be used, others may be fixable, $50 each
Have for sale 939 5th wheel and ramps

TRADE
Anybody going to singles want to trade a set (20l,20r) of single rear lug nuts for a set of thimbles and thimble nuts (20l,20r of each), this is taken care of.

2018 Georgia Military Vehicle Rally buy-sell-trade

In Memorial

Rock = older than dirt , GA. MAFIA , Dirty

Active member

Rock = older than dirt , GA. MAFIA , Dirty

Well-known member

Member

Attachments

Active member

Administrator

Member

Attachments

Well-known member

Chief

GA Mafia Imperial 1SG

Active member

Attachments

Member

Well-known member

Well-known member

Well-known member

Active member

Well-known member

Attachments

Rock = older than dirt , GA. MAFIA , Dirty