2019 Georgia Military Vehicle Rally buy-sell-trade

[joeM62]

cheap clean ammo cans
cheap jerry cans
cheap cots
cheap tires 900's, 1100's, 1400's, preferably mounted, tread not that important, just holding air

Also, I have recently started collecting USMC jerry cans, not the ones with USMC on the bottom (those are just made by U.S. Metal Container, not used by the Marines), but with USMC on the side of the can.

I don't have hardly any money, but will have tons of stuff to trade.

Derek

Pm you on the cans.

 

[StrykerPerry]

s788 shelters. $600 plus $150 if you want me to bring it to ga rally. May trade. Weight is about 600#. Roughly 9'x7' x 6' tall. Outside pm me for more info

 

[SCSG-G4]

When is the Georgia rally this year? Is it at Durhamtown? Didn't see it under the threads: General/Steel Soldiers Rally or General/Upcoming Events.

The general thread for the rally has not been posted yet, but the dates are Oct 16-20, 2019 at the same field at Durhamtown.

When: October 16-20, 2019.


https://www.steelsoldiers.com/showt...Rally-(19SSGR)-Georgia-Military-Vehicle-Rally
​

 

[SETOYOTA]

cheap clean ammo canscheap jerry canscheap cotscheap tires 900's, 1100's, 1400's, preferably mounted, tread not that important, just holding air
Also, I have recently started collecting USMC jerry cans, not the ones with USMC on the bottom (those are just made by U.S. Metal Container, not used by the Marines), but with USMC on the side of the can.
I don't have hardly any money, but will have tons of stuff to trade.
Derek

I have 6 deuce wheels with tires. 4 mud grips like new tread and 2 ndt good tread

 

[timntrucks]

Looking for a front jack for a 105..

 

[TaylorTradingCo]

Looking for a front jack for a 105..

Tim, I have one. I will take a pic of it next time I am at my shop and send it to you.

Derek

 

[microjeep]

Anyone need m101 racks? I'm planning on making it this year. Not sure what else I may have to sell.

How complete? sides,front, back, bows? wood or fiberglass? how much? thanks Micro

 

[dstang97]

Looking for a 5/8 snatch block and complete m939a1 winch.

 

[Floridianson]

Found some more goodies.
5 ton 809 series NOS passenger side fender. Light scratches from storage but new. asking $300.00.
Deuce /809 NOS seat tops with frame work. Asking $100.00
809 I believe it was 14 foot long bed cover camo great shape. Asking $200.00
939 series NOS muffler asking $150.00.
NOS air tanks they are the same size as the Deuce tanks but have a two separate sides so need to use as is or long drill bit to connect the two sides. $100.00
HEMTT wheels NOS $150.00 per wheel.
Combat wheels 5 ton NOS $200.00
NOS Deuce battery box asking $100.00
Nos Military 6 hp. gas engine believe it is the 4AO32-1 asking $500.00 and I have some parts like mufflers and starter that needs a lug but good 24 volt starter.
They came out of a 809 series rear so one 5 ton axle. asking $100.00
Deuce non drop side tailgate with five hinge good shape needs cleaning and paint. Asking $100.00
Deuce bumper good shape just paint. $100.00

 

[simp5782]

Found some more goodies.
5 ton 809 series NOS passenger side fender. Light scratches from storage but new. asking $300.00.
Deuce /809 NOS seat tops with frame work. Asking $100.00
809 I believe it was 14 foot long bed cover camo great shape. Asking $200.00
939 series NOS muffler asking $150.00.
NOS air tanks they are the same size as the Deuce tanks but have a two separate sides so need to use as is or long drill bit to connect the two sides. $100.00
HEMTT wheels NOS $150.00 per wheel.
Combat wheels 5 ton NOS $200.00
NOS Deuce battery box asking $100.00
Nos Military 6 hp. gas engine believe it is the 4AO32-1 asking $500.00 and I have some parts like mufflers and starter that needs a lug but good 24 volt starter.
They came out of a 809 series rear so one 5 ton axle. asking $100.00

Fuzzytoaster was looking for a fender james. I am on 95 today and 75 tomorrow If yall can work it out

 

[Floridianson]

Looking for a 5/8 snatch block and complete m939a1 winch.

I have plenty of snatch blocks. Deuce to 5 ton to wrecker rear winch cable blocks. I will bring some with me and you can look them over. If someone wants the 5 ton rear winch cable block that must be paid for before I even load it up. Have to pay the doctor bill for a dropped acorn after I try and pick it up.

 

[Floridianson]

Cab soft top wire braces Deuce -809 series. $5.00 per brace.
Sorry only the drivers side soft top / window frame work NOS $25.00 per one. Wish I had about 7 passenger side if any one knows of some for sale or trade.
What do these two panels fit and how much will you give me for them?

 

[gimpyrobb]

James, those panels in the last pic look cool, I may be interested in them. Roughly what size are they?

 

[TaylorTradingCo]

Not really military related, but I just picked up a bunch of these sturdy stackable plastic storage crates, $2 each if you guys can use them. They are 18"x12"x4" inside.

 

[Floridianson]

James, those panels in the last pic look cool, I may be interested in them. Roughly what size are they?

I will measure them. I think they are the screen doors for a submarine with port hole cut out.

 

[Andyrv6av8r]

I will measure them. I think they are the screen doors for a submarine with port hole cut out.

Probably not, wrong color.

 

[gimpyrobb]

How complete? sides,front, back, bows? wood or fiberglass? how much? thanks Micro

We've been selling 2 long sides and 2 sets of gates for $150. Metal and fiberglass construction. The long sides are all lefts, so you'll need to move the bow holders to the front on one side. I may be able to find some wood bows, will have to let you know.

 

[Floridianson]

Probably not, wrong color.

Yea did not think of the color being wrong. Maybe we could paint it Navy Blue.
Chris they are 3'x3' if you want them they are yours no charge. Scrap to me.

 

[Squirt-Truck]

looking for front leg jack for 101 trailer.

 

[wheelspinner]

I will have 2 of these Mastercraft seats with me. They are $400 each if prepaid and $450 each if I drag them down uncommitted.

SOLD!