- 14,258
- 1,759
- 113
- Location
- Dayton, OH
I have a good takeout NHC-250 starter. $50
I'll bring is someone commits to it.
I'll bring is someone commits to it.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
2019 Georgia Military Vehicle Rally buy-sell-trade
- Thread starter patracy
- Start date
- 14,258
- 1,759
- 113
- Location
- Dayton, OH
1crook
Member
- 221
- 0
- 16
- Location
- Bethlehem, GA
I am getting things ready to take to the Rally. I will be running a special on the NOS M35A2 Master Cylinders that I have for someone that wants to buy several(They fit M109, M109A3, M35, M35A1, M342, M49A2C, M44 series vehicles). I will sell one for $40 each, two for $75 and three for $100. Please let me know if you plan on buying multiples so that I can make sure to bring enough.
Last edited:
Battery hold downs $20 for the straight one $10 for the bent one.
Hunter camfire military 60,000 BTU clean air diesel heater m, exhaust is directed upward and the warm clean air is blown towards you (I’ve ran other units in the past on WMO/WVO/WATF mix) 1 runs fine the other has a hole in the heat exchanger from a private adjusting the fuel rate too high can be welded.
$350 for both will not separate
SOLD: SCM35a2 Wooden munition fuse crates, locking.
$20 each or $30 if you take both
Sent from my iPhone using Tapatalk
Hunter camfire military 60,000 BTU clean air diesel heater m, exhaust is directed upward and the warm clean air is blown towards you (I’ve ran other units in the past on WMO/WVO/WATF mix) 1 runs fine the other has a hole in the heat exchanger from a private adjusting the fuel rate too high can be welded.
$350 for both will not separate
SOLD: SCM35a2 Wooden munition fuse crates, locking.
$20 each or $30 if you take both
Sent from my iPhone using Tapatalk
Last edited:
matt444
Member
- 79
- 74
- 18
- Location
- Edgemoor SC
profo
Active member
- 428
- 73
- 28
- Location
- jeanerette,la
I'll take three!
- 2,053
- 2,949
- 113
- Location
- Florence, SC
Id like both wooden munition fuse crates sir if not spoken for!
- 4,038
- 119
- 63
- Location
- Ponchatoula LA
Found a 5ton master cylinder, one 1100 radial tube, some take out head lights and tail lights these are loaded up. here is a pic of the winch cable(sold)
Attachments
Last edited:
- 5,368
- 3,378
- 113
- Location
- Lexington, South Carolina
I'll take two.
Mike
I have a 24' tandem axle/dual wheel gooseneck trailer for sale to haul everything you buy at the rally home on. It has Dexter brand axles with oil bath hubs, 75+ % Goodyear tires, and 10' slide out ramps that stow in the rear. It's used and a little weathered, but not beat up. It has minor surface rust and could use a little TLC, but overall it's in good condition for a used trailer. Asking $4,200.
Attachments
- 2,053
- 2,949
- 113
- Location
- Florence, SC
Still have these parts if anyone needs them.
Last edited:
- 3,748
- 1,521
- 113
- Location
- North Carolina - FINALLY !
Eli I have NOS in the box @$200. I haven't packed it but I can. No support arms though
- 441
- 47
- 28
- Location
- Blythewood, SOUTH CAROLINA
ill take 3 as well. Any chance you have 5 ton at same package deal?
Lovetofix
Member
- 87
- 63
- 18
- Location
- Morrison,TN
I will take it. This will be my first time to the rally! Definitely need to take something home.
Sent from my iPhone using Tapatalk
1crook
Member
- 221
- 0
- 16
- Location
- Bethlehem, GA
I have you down for 3. Unfortunately I do not have any 5 ton master cylinders.
- 14,258
- 1,759
- 113
- Location
- Dayton, OH
Sorry someone beat you to it.
- 14,258
- 1,759
- 113
- Location
- Dayton, OH
Updated sold list
amgeneral72
Active member
- 487
- 124
- 43
- Location
- HOLLY SPRINGS GA
I’ll take three of those as well thank you Dawn