2019 Georgia Military Vehicle Rally buy-sell-trade

[SCM35A2]

What's left over, I dropped the prices on all of it...

Got some old misc M35A2 parts...reflector bezels, fire ext bracket, tailgate step, box of hood hinges, latch & hood catch/hold downs. $25 for it all (SOLD)​

7 lift hooks. $30 for all of them (SOLD)

Battery hold downs that come off my M923A2/5ton truck, these are $10 each ​

Battery hold down J-hooks-(all used), have 6 of these at $5 each or $25 for all of them.




​

​

 

[matt444]

What's left over, I dropped the prices on all of it...

Got some old misc M35A2 parts...reflector bezels, fire ext bracket, tailgate step, box of hood hinges, latch & hood catch/hold downs. $25 for it all​

7 lift hooks. $30 for all of them &

Battery hold downs that come off my M923A2/5ton truck, these are $10 each ​

Battery hold down J-hooks-(all used), have 6 of these at $5 each or $25 for all of them.
View attachment 779550View attachment 779551View attachment 779552View attachment 779553View attachment 779554View attachment 779555View attachment 779556View attachment 779557View attachment 779558



​

​

I will take the misc m35a2 parts and hooks

Sent from my XT1650 using Tapatalk

 

[1958 M274]

I'm looking for two green MRAP seats like the one shown in the attached picture.

Also, I'm dropping the price on my 24' gooseneck trailer to $3,900. It's tandem axle/dual wheel and has side out ramps. See post 352 for more pictures and info.

 

[SCM35A2]

I will take the misc m35a2 parts and hooks

Sent from my XT1650 using Tapatalk

Yours sir!

 

[wheelspinner]

I'm looking for two green MRAP seats like the one shown in the attached picture.
.

Dang Joe I just installed the last two I had of those seats. They sure are comfortable!

 

[Swamp Donkey]

I'm looking for two green MRAP seats like the one shown in the attached picture.

Also, I'm dropping the price on my 24' gooseneck trailer to $3,900. It's tandem axle/dual wheel and has side out ramps. See post 352 for more pictures and info.

I don't have those particular seats but I do have 2 HEMTT Air Ride seats that are still in the plastic. They were pulled from a NOS HEMTT cab I bought. They come with the over the shoulder seat belt harness as well. They are high back but don't have the headrest like the ones pictured. If you're interested I can take some pictures tonight. I don't plan on bringing them unless someone is committed to buying them. I'm packing very light this year.

 

[Dodge60]

I have some wheels and tires that I brought to the rally with me

 

[SCM35A2]

Last minute extra stuff I have that I'll load up if someone commits to buying...

New in the box-(drivers side) complete door for a M35A2 truck: $400
New in the box-(NOS) complete coolant type heater kit for the M35A2/2.5 ton, M44 series & the 5ton M800 series trucks: $450
NOS outside door handle: $10
New M35A2 seat shock: $50
Used Parker fuel pump 24V (great swap for the M35A2): $50 (SOLD)
Antenna mount-(used): $10

 

[Elijah95]

Last minute extra stuff I have that I'll load up if someone commits to buying...

New in the box-(drivers side) complete door for a M35A2 truck: $400
New in the box-(NOS) complete coolant type heater kit for the M35A2/2.5 ton, M44 series & the 5ton M800 series trucks: $500
NOS outside door handle: $10
New M35A2 seat shock: $50
Used Parker fuel pump 24V (great swap for the M35A2): $50
View attachment 779750View attachment 779751View attachment 779752View attachment 779753View attachment 779754View attachment 779755View attachment 779756View attachment 779757View attachment 779760View attachment 779761

I’ll take the Parker pump


Sent from my iPhone using Tapatalk

 

[SCM35A2]

Yours sir!

 

[patracy]

Well, I'm just now off work. So I'll get to come tomorrow instead of Friday. But I won't be there till the afternoon. If time allows I might try to get my gooseneck done. (Brakes, wheel bearings) And bring a surprise. But likely I'll just been in my Jeep this time. I've been working 12+ hr days for the past few days in the office (so like 15hrs away from home each day). I just didn't have time to get everything done I wanted to get done.

I'll still be bringing the generator head, maybe the yanmar motors, plus a few other things for Clint and Kenny. But since there's not been any interest in it, I'll not be bringing the AC unit, ring, and big stuff.

I'm still needing all the stuff I mentioned earlier. But now specifically I'm looking for a set of front turn signal LED lights and some rear tail light housings. (I have LED's for them)

 

[Recovry4x4]

Well, I'm just now off work. So I'll get to come tomorrow instead of Friday. But I won't be there till the afternoon. If time allows I might try to get my gooseneck done. (Brakes, wheel bearings) And bring a surprise. But likely I'll just been in my Jeep this time. I've been working 12+ hr days for the past few days in the office (so like 15hrs away from home each day). I just didn't have time to get everything done I wanted to get done.

I'll still be bringing the generator head, maybe the yanmar motors, plus a few other things for Clint and Kenny. But since there's not been any interest in it, I'll not be bringing the AC unit, ring, and big stuff.

I'm still needing all the stuff I mentioned earlier. But now specifically I'm looking for a set of front turn signal LED lights and some rear tail light housings. (I have LED's for them)

If your looking for a rear tail light bucket for an LED composite light, I have one really nice one you can have.

 

[Recovry4x4]

Well, I'm just now off work. So I'll get to come tomorrow instead of Friday. But I won't be there till the afternoon. If time allows I might try to get my gooseneck done. (Brakes, wheel bearings) And bring a surprise. But likely I'll just been in my Jeep this time. I've been working 12+ hr days for the past few days in the office (so like 15hrs away from home each day). I just didn't have time to get everything done I wanted to get done.

I'll still be bringing the generator head, maybe the yanmar motors, plus a few other things for Clint and Kenny. But since there's not been any interest in it, I'll not be bringing the AC unit, ring, and big stuff.

I'm still needing all the stuff I mentioned earlier. But now specifically I'm looking for a set of front turn signal LED lights and some rear tail light housings. (I have LED's for them)

If your looking for a rear tail light bucket for an LED composite light, I have one really nice one you can have.

 

[SCM35A2]

Last minute find, seat bracket & seat and I have no clue what it fits...$10

 

[SETOYOTA]

Old Hmmwv seat

 

[SCM35A2]

Old Hmmwv seat

Thank you sir!