24v cummins to mechanical?

[gimpyrobb]

A buddy found some 24v motors fairly cheap. Im wondering about maybe putting one in my deuce. Is it possible to do away with the electronics(easily? )

 

[simp5782]

Just do like the NHC250s are add a solenoid that will energize the 24v fuel.shut off solenoid and then just add the manual cut all valve for a cable above it. You can have the solenoid energize when the main switch is flipped

 

[gimpyrobb]

Yeah but doesn't the motor require the ecu to run? There is a whole mess of wires coming off the side of it.

 

[simp5782]

Put a p7100 pump on it. Its mechanical. Sorry I don't know what generation 24v your buddy might be getting

If it's cheap it may be worth it. I would just buy an old school bus with a DT466 in it and go that way with the allison 545. If you didn't feel like messing with a stick shift anymore. Then scrap the bus for most of what you paid for it.

https://youtu.be/wasSUnNMFoA

 

[doghead]

Just wire-nut all those wires together and it shoud work.

But, since it's a 24V motor, it should already be 24 volt...