FMFHMMWV
Member
- 99
- 52
- 18
- Location
- Oceanside, California
So I gave into an impulse buy and purchased the 3 inch Mikellis body lift. I intend on documenting how it goes step by step on this string. I know of 4 mods that must be completed along with the installation of these body spacers.
1. undoing brake master cylinder from body panel.
2. readjusting shift linkage
3. dropping fuel cell with provided 3 inch blocks.
4. cutting out relief hole where steering column passes through body.
can anyone think of anything else?
1. undoing brake master cylinder from body panel.
2. readjusting shift linkage
3. dropping fuel cell with provided 3 inch blocks.
4. cutting out relief hole where steering column passes through body.
can anyone think of anything else?
