dayers024
New member
- 8
- 0
- 1
- Location
- Remington, VA
I know I've seen post before but I can't find them in my search!!! Maybe because I'm on tapatalk? But anyways will 315/75r16 fit stock ride height without trimming?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
315/75r16 fit stock m1008
- Thread starter dayers024
- Start date
- 95
- 49
- 18
- Location
- Sussex New Jersey
I tried to fit them om my stock 1028. They do hit the front fender edge a little but my biggest issue was that they rub on the frame when turning. I would have had to adjust the stops out to far for my liking
Ilikemtb999
Active member
- 701
- 45
- 28
- Location
- Denver, CO
Not sure how similar but I've got that size tire on my m1009 with a 2" lift and I had to trim the front fenders on both ends. I also have 4.5" backspacing on my wheels (which was as far in as I could find to tuck the wheels)
red
Active member
- 1,988
- 25
- 38
- Location
- Eagle Mountain/Utah
You'll have to trim. Largest that will fit stock without trimming and allow full axle articulation is 32x12.5".
If you're willing to trim (alot) you can fit the humvee 37"s at stock height. That's what I run on my 82 k20
If you're willing to trim (alot) you can fit the humvee 37"s at stock height. That's what I run on my 82 k20