LT67
Well-known member
- 655
- 499
- 63
- Location
- Bowdon, GA
After a recent round trip in the M1008 that involved some interstate time, I'm thinking of throwing a set of 37's on. I like the 35's I currently have on the truck, but I felt like I was going to get ran over while going 56-57mph on the highway.
I'm not going to swap out the T400, so it's either 37's or regear the differentials if I do it. I currently have a factory style 4 leaf set up in the front that nets 2.5-3in of lift. The brake lines currently have plenty of length for the current set up.... I'm thinking of installing an EZ Inch in the front. How did anyone install an EZ Inch on the passenger side of the Dana 60? Here's a few pics of how the shop set up my springs on the front.
![38536409_1870052699704787_5509204045782319104_n.jpg 38536409_1870052699704787_5509204045782319104_n.jpg](https://www.steelsoldiers.com/data/attachments/505/505218-a22460547970d00d9fe5e082314c4c76.jpg)
I'm not going to swap out the T400, so it's either 37's or regear the differentials if I do it. I currently have a factory style 4 leaf set up in the front that nets 2.5-3in of lift. The brake lines currently have plenty of length for the current set up.... I'm thinking of installing an EZ Inch in the front. How did anyone install an EZ Inch on the passenger side of the Dana 60? Here's a few pics of how the shop set up my springs on the front.
![38600856_1870051723038218_6680045906294734848_n.jpg 38600856_1870051723038218_6680045906294734848_n.jpg](https://www.steelsoldiers.com/data/attachments/505/505217-b6e531addf2fb88d8f36bf19c75def31.jpg)
![38536409_1870052699704787_5509204045782319104_n.jpg 38536409_1870052699704787_5509204045782319104_n.jpg](https://www.steelsoldiers.com/data/attachments/505/505218-a22460547970d00d9fe5e082314c4c76.jpg)
Last edited by a moderator: