• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

3L80 Tranny issues

badgerord

Member
31
2
8
Location
Kansas City, MO
Looking for some insight from the mind hive.
My 1986 M1044A1 HMMWV was running great, took a 30 mile road trip to visit a buddy that just bought a new plane. As I approached the airfield I had to stop at an intersection, when I pulled away from the line had no 3rd gear (3L80 Tranny) after a little bit it popped into 3rd, but at the next stop, it would not go into 3rd at all, than after another 2 miles, no 2nd gear.
Checked it for Vampire syndrome, nothing, checked fluid level, it was OK. Any ideas???
 

NDT

Well-known member
Steel Soldiers Supporter
10,509
6,645
113
Location
Camp Wood/LC, TX
Worth it to check the modulator function and governor gear condition, both can be done with the Hydramatic in the truck.
 

NDT

Well-known member
Steel Soldiers Supporter
10,509
6,645
113
Location
Camp Wood/LC, TX
Personally I would find a highly rated local transmission shop and have them do a “ bench job”.
 

Maxjeep1

Well-known member
Steel Soldiers Supporter
1,338
1,918
113
Location
Las Vegas Nevada
So you could have aluminum all thru the lines and cooler, torque converter? I had a transmission go bad under warranty and fixed by the dealer and I didn’t make it out of the parking lot before the new transmission failed because they didn’t replace torque converter that was full of shavings. Does transmission share fluid with the transfer case? What a mess
 

badgerord

Member
31
2
8
Location
Kansas City, MO
So you could have aluminum all thru the lines and cooler, torque converter? I had a transmission go bad under warranty and fixed by the dealer and I didn’t make it out of the parking lot before the new transmission failed because they didn’t replace torque converter that was full of shavings. Does transmission share fluid with the transfer case? What a mess
Yes it does, and a cooler !
 

Ajax MD

Well-known member
1,569
1,415
113
Location
Mayo, MD
Well it turns out there is a bunch of Aluminum in the pan, need a new tranny.
Who has reputable rebuilds ???
I see these transmissions for sale all the time because people are always upgrading to the 4-speed. Normally I'd be skeptical of buying a used automatic transmission but the 3L80 is so robust that I think the risk is acceptable.

Why not ask around for a used 3L80 and see how it prices out compared to a rebuild?
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,018
9,702
113
Location
Papalote, TX
Heck I have one with 6K on it but I am in Texas, no doubt you can find one much closer.
The transmission cooler is a multi pass and they are very difficult to get clean, I would suggest replacing it.
 

kzeyus

Active member
141
30
28
Location
Rogers, AR
Just pulled a working 3l80e and 218 xfer out this past week to replace with 4l80e. I'm near Rogers, AR about 4 hours south of KC
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks