400amp to a 200amp generator

[4x4nutz]

I am taking out a 400amp gen and replacing it with a 200amp. May I have a after-market part# for the pully I need...also, do I need to change out a bracket? Thnx

 

[Retiredwarhorses]

There isn’t an aftermarket pulley for any of the gens, let alone for the 200amp.
There are only 2 correct pulleys for the 200 and 400, one is a clutch pulley and one is a fixed pulley, both Use a different
size belt.

 

[4x4nutz]

I have both size belts. I think the pully from the 400 sticks out too far to use on the 200, so I guess I need a regular 200 pully...lol...right?


NSN 3020-01-444-5447, 3020014445447

 

[86humv]

I have both size belts. I think the pully from the 400 sticks out too far to use on the 200, so I guess I need a regular 200 pully...lol...right?


NSN 3020-01-444-5447, 3020014445447

If you have the 6.5 with the power steering reservoir on top ...the NSN you listed will not work, you would need: 12469483, 12469495, 12469496.

 

[4x4nutz]

If you have the 6.5 with the power steering reservoir on top ...the NSN you listed will not work, you would need: 12469483, 12469495, 12469496.

Great. Thank you sir.