• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

4L80E Troubleshooting

rcamacho

Well-known member
774
858
93
Location
Bainbridge Island Wa
Working with the troubleshooting guide. Pulled codes, DTC 71 indicating crankshaft position sensor loss of signal.

Tested sensor, open circuit. Replaced sensor using known good and tested unit.

Repeated code 71…. Moving on to testing continuity of circuit 349 and 359 from the sensor to the TCM. Here’s where the real fun starts!

Supplement indicates pins H and P terminate circuits 349/359 respectively. Well, the cannon plug shows no terminated pins at these positions



Wonder if the body harness is incorrectly wired for this circuit or if the TM Supplement is incorrect on pin output.


Sent from my iPhone using Tapatalk
 
Last edited:

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
7,016
9,690
113
Location
Papalote, TX
Maybe it is the other P and H??
I count 37 holes, there are only 26 letters so I would assume some are repeated in lower case.
EDIT, it also looks like they do not use Q, O, or I
Sorry I can not be more help, I have never seen a 4L80E
 
Last edited:

rcamacho

Well-known member
774
858
93
Location
Bainbridge Island Wa
Maybe it is the other P and H??
I count 37 holes, there are only 26 letters so I would assume some are repeated in lower case.
EDIT, it also looks like they do not use Q, O, or I
Sorry I can not be more help, I have never seen a 4L80E
Ah, very good call out. I did not realize there were lower case letter pins as well. :)
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks