• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

5 ton 925A2 ABS light

blackhorse

New member
7
2
3
Location
west palm beach/Fl
1990 5 ton has an ABS (air brake system) and the ABS light will not go off when I get ready to start. The warning label says you can damage the system if you try to drive it with the light on. Everything look
s alright with the brakes, any ideas on what I should check?
 

gimpyrobb

dumpsterlandingfromorbit!
27,786
757
113
Location
Cincy Ohio
A place that I work at had a truck with the abs light on. Turned out on of the brakes was caged. Once cage bolt was removed, light went out.
 

Coffey1

Well-known member
Steel Soldiers Supporter
3,871
497
83
Location
Gray Court SC
My ABS light was on. And now it's not.
Go to rear axle check wires going to hubs mine was cut into.
Patched them back all is good.
Abs is only on rear axle.
 

MtnSnow

New member
1,466
14
0
Location
NSL, UT
Also check the connections to the ABS box at the rear axle. Sometimes the box gets damaged from voltage spikes (ie improper shutdown etc)
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks