CrappiePoint
Active member
- 51
- 125
- 33
- Location
- Arkansas
Hello everyone. Sorry I’ve been slow posting. I don’t take a lot of pictures. I spent a couple weeks working to cut the bed down three feet. I used the side panels as guides and cut out 1 full section (3ft) off the front of them. I then used the hinges as guides to set the distance for the floor and frame cuts. I used a 3 x 7 x 3 inch Z notch to maximize the weld of the frame. I am currently editing the bed video and will add a link soon. Let me know what y’all think!! OH! I also added the het tool box/step.
