guner51
Member
- 153
- 0
- 16
- Location
- Metamora, Illinois
can anybody tell me the weight of a 20,000 lbs. winch off a 5 ton
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
5 ton winch
- Thread starter guner51
- Start date
Boyce Equipment says...
"Our 20,000 lbs. Garwood, is ideal for installing in the rear of trucks with its 34 in. width. It too can be bolted to a stock frame. The length (30in.) is sometimes bulky, mounted in the front. It fits nicely under truck beds. Weight-220 lbs."
"Our 20,000 lbs. Garwood, is ideal for installing in the rear of trucks with its 34 in. width. It too can be bolted to a stock frame. The length (30in.) is sometimes bulky, mounted in the front. It fits nicely under truck beds. Weight-220 lbs."
- 14,639
- 4,820
- 113
- Location
- Buchanan, GA
Sorry, ain't buying 220lbs. Gotta weigh more than that. I know I had to use a 3 point lifting hitch on a tractor to load mine into the bed of a deuce.
steelandcanvas
Well-known member
- 6,187
- 85
- 48
- Location
- Southwestern Idaho
Heck, a 10K Deuce winch and accesories weighs 530#.
Boyce Equipment says...
"Our 12,000 lb. Garwood winch is the most popular since it can be mounted between most stock truck frames (34in). Bolts from the outside of the frame. Weight-156 lbs."
That, too, seems awfully light, but here's the source...
http://www.boyceequipment.com/engines.html
"Our 12,000 lb. Garwood winch is the most popular since it can be mounted between most stock truck frames (34in). Bolts from the outside of the frame. Weight-156 lbs."
That, too, seems awfully light, but here's the source...
http://www.boyceequipment.com/engines.html
Last edited:
- 6,986
- 2,523
- 113
- Location
- Montevideo/Uruguay
From the book.....
(attached)
G.
(attached)
G.
Attachments
- 1,180
- 163
- 63
- Location
- Marietta, Georgia
Still gotta add rope
67383wagon
New member
- 26
- 0
- 1
- Location
- LaGrange, Oh
Just shipped one winch, pto, frame extensions etc 1,460 on a pallet
- 424
- 56
- 28
I removed mine about a month ago using an engine hoist......and it's easily 700-800 Lb's with rope and the side guide rollers.
Attachments
tashaak
New member
- 31
- 0
- 0
- Location
- Tok, Alaska
Does anyone know if you can winch and drive a M925A1 at the same time. I cannot seem to find anything in the archives on this. I guess what I am asking is can the winch be engaged and in drive at the same time to help getting unstuck. Thanks Gary
M925
Member
- 213
- 2
- 18
- Location
- New River Valley, Virginia
It's a self recovery winch.........
- 14,639
- 4,820
- 113
- Location
- Buchanan, GA
To be used in the manner in which the TM describes.
With the truck in gear, the PTO output isn't going to spin at speed. Remember, that's how it's engaged. Only in neutral does the PTO spin at enough speed for the hyd. to work properly. It's not meant to be ran on the road.
- 12,195
- 325
- 0
- Location
- gainesville, ga.
Does not look like it, the m39/m809s you can
M925
Member
- 213
- 2
- 18
- Location
- New River Valley, Virginia
Thank you for the clarification.
Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
That would be a no, which is nuts but true the front winch on all 939 series trucks are not for self recovery the -10 clearly states that a second vehicle with a winch is to be used to unmire a truck in deep mud. This means only a 936 can self recover with the rear winch.
- 1,631
- 736
- 113
- Location
- Central NY
I must be missing something, but yes, assisting the winch for self recovery with driving wheels would be nice, (But some dufus probably had a wreck doing it wrong and therefore spoilt it for all that follow - new ruleing and soforth) BUT, what's wrong with using the winch, at full pto speed, truck in neutral for SELF RECOVERY????? - of course, snatch blocks to multiply capacity etc., when really stuck.
Csm Davis
Well-known member
- 4,166
- 393
- 83
- Location
- Hattiesburg, Mississippi
Generally the truck should be able to drive in the direction of the pull to be considered a self recovery winch.