5 Ton Wrecker To Part Out

[Greengemdepot]

Hey guys this is Matt, and I have TWO 5 ton military wreckers that I am parting out. If anyone is interested in any parts let me know.

 

[rizzo]

I am interested in the air pak and the front winch chain

 

[M543A2]

I need all of the information plates on the control platform for the boom/hoist on the M543A2. Mine have become faded to the point of being hard to read.
Thanks Marti

 

[Recovry4x4]

Scrapping Frankenstein? It's a yard truck Matt!

 

[AMGeneral]

I need the hook block for the crane and 3 wheels plus the drivers side engine compatment panel above the fender.Thanks.

 

[rumplecat]

Long Boom Jacks

Do either of your trucks still have the long boom jacks, I need a set.
James G.

 

[cranetruck]

RE: Long Boom Jacks

I would be interested in the 5-ton winch snatch block, if original equipment.

 

[dc3coyote]

RE: Long Boom Jacks

OHH I still gotta get the rest of that c turbo stuff from you, Matt

 

[houdel]

I can use a crane snatch block if it is the single pulley 3 line type with the dead end of the cable attached to the block as shown in the picture. I can also use a set of the crane operators information plates on the control platform (boom in/out etc) if you have a legible set.

 

[dc3coyote]

I just want to get a 5 ton wrecker

 

[5tonpuller]

Hi Matt,
PM me on what you want for the right rear stab pocket that is bolted to the frame under the truck and the front winch glad hand ( that hooks to the cable ) and chain. Thanks

 

[rizzo]

I am also interested in the front mounting points for the field chocks


http://i20.photobucket.com/albums/b213/frankrizzo1972/my trucks/frontfieldchocksockets.jpg

 

[docfarmall]

i would just like to by the whole truck

 

[5tonpuller]

Has any one heard about the out come of this? Never heard from the guy.

 

[5_TON_TOMATOE]

I NEED THE FRONT DRIVESHAFT!