SCSG-G4
PSVB 3003
- 5,379
- 3,413
- 113
- Location
- Lexington, South Carolina
Any leads on the "O" rings for the 21 inch wheels? Part number, NSN, source, availability, etc.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
7 ton MTVR Parts Reference Spreadsheet
- Thread starter simp5782
- Start date
These trucks run 20” wheels, same part number o rings as Hemtt wheels
I normally order mine from ken spencer
MV Parts Store, for all your Military Truck Parts
Military Truck Parts, Military Vehicle Parts, Dog Tags, Military Tires, Military Gear, Military Surplus. Oshkosh MK23, HMMWV M998, M1038, M1097, M1123, M1121, M1045, M1025, M1035, AM General M923, M925, M920, M915, M916, Jeep, M1151, MUTT, M37
mvpartstore.com
Sent from my iPhone using Tapatalk
Should I be able to see this parts list? It says I need access
All seals and O-rings
I have contacted OVL. I can order all seals O-rings etc to rebuild passenger and driver side front wheel axle hub. However there is one problem with one seal they have a minimum order of 100. I believe if those of us who needed them would give them a call asap they would see the value in stocking A variety of parts for these trucks. All the other seals and O-rings that I need they have in stock and will sell one and two at a time. Long story short I think it was $350 to get everything I needed. Not bad my opinion for new parts. FYI that quote also included a water bottle and pump.
If your like me when it comes to degradable parts like seals etc. I prefer NEW over aged surplus thats been dry rotting on a shelf somewhere.
I have contacted OVL. I can order all seals O-rings etc to rebuild passenger and driver side front wheel axle hub. However there is one problem with one seal they have a minimum order of 100. I believe if those of us who needed them would give them a call asap they would see the value in stocking A variety of parts for these trucks. All the other seals and O-rings that I need they have in stock and will sell one and two at a time. Long story short I think it was $350 to get everything I needed. Not bad my opinion for new parts. FYI that quote also included a water bottle and pump.
If your like me when it comes to degradable parts like seals etc. I prefer NEW over aged surplus thats been dry rotting on a shelf somewhere.
Last edited:
MAdams
Active member
- 381
- 132
- 43
- Location
- San Dimas, CA
What seals are you referring to? The wheel only has one seal, the big o ring that goes between the rim halfs. Are you talking about the ctis wheel valves, the hub seals?
Sent from my SM-G975U using Tapatalk
Sent from my SM-G975U using Tapatalk
Sorry poor choice of terms on my part. I was referring to the hub/axle and CTIS seals.
Total of 4 seals and an o-ring for each
Last edited:
- 283
- 118
- 43
- Location
- Mico, Texas
Can anyone recognize what exactly this is? I bought a load of Humvee parts and this 250 pound box came with it...Not humvee parts... here's a couple pics...
- 1,117
- 1,054
- 113
- Location
- Perry, FL
Any way for us non-Google users to access this?
I’d like to see that if possible. Thanks
I would like to see that as well
I would love a copy of this exploded parts cab diagram. I am about to embark on a cab rebuild
JW7tonWY
Active member
- 105
- 145
- 43
- Location
- Central Wyoming
If you are sharing I would love a copy too.
JW7tonWY
Active member
- 105
- 145
- 43
- Location
- Central Wyoming
I have just replaced my turn signal switch, I ordered it thru ATAP, When I received it did a little research the part is made by TRW Screen shot below is the same part if anyone else is looking for it.
Currently on ebay, the direct from oshkosh part was only $30-50 more so not saving much. I have the 2002 MK23, not sure if the AMK's used anything different . link below.
Currently on ebay, the direct from oshkosh part was only $30-50 more so not saving much. I have the 2002 MK23, not sure if the AMK's used anything different . link below.
TRW Control turn signal 480847 | eBay
Find many great new & used options and get the best deals for TRW Control turn signal 480847 at the best online prices at eBay! Free shipping for many products!
www.ebay.com
MAdams
Active member
- 381
- 132
- 43
- Location
- San Dimas, CA
This is a good option too
MTVR-2MK23 OSHKOSH 2CX984 SWITCH DIRECTIONAL SIGNAL LIGHT CONTROL | eBay
We will try to resolve any issues, but we can’t rectify a problem if we are not aware of it. AGAV End Item Identification 2320-01-465-2174.
www.ebay.com
JW7tonWY
Active member
- 105
- 145
- 43
- Location
- Central Wyoming
Do you have any leads on a fuel tank sender unit?This is a good option too
MTVR-2MK23 OSHKOSH 2CX984 SWITCH DIRECTIONAL SIGNAL LIGHT CONTROL | eBay
We will try to resolve any issues, but we can’t rectify a problem if we are not aware of it. AGAV End Item Identification 2320-01-465-2174.www.ebay.com
JW7tonWY
Active member
- 105
- 145
- 43
- Location
- Central Wyoming
Has any one done any repairs on the AC unit? One of my switches, blew thru its center pressure from the AC, Believe High side and is now open circuit. When I started testing I found the leak coming our around the terminals and in the spot in the middle. Our of the try anything mode of trouble shooting I tightened the body to the fitting and the leaking stopped but circuit was still open. I bypassed the circuit and charged the sytem to spec pressure and it worked for testing purposes but i need the sensor. I am sure it is a standard off the shelf part I just don't have shelves like that in middle of Wyoming. arrow points to part
Part # on your switch should give you the cut out pressure.
Low and high pressure switches listed below.
Attachments
JW7tonWY
Active member
- 105
- 145
- 43
- Location
- Central Wyoming
That is awesome thanks so much!
I think the part number your looking for is Airsource # 1513 binary switch, this switch has low press and high press on/offs in the same switch. The green switch is the engine fan switch, Air source # 1446.