-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
700R4 trans in a CUCV
- Thread starter waugs
- Start date
Westech
CPL
- 6,104
- 207
- 63
- Location
- cow farts, Wisconsin
have you searched? many members have done this swap.. all the info you need is here.. just have to look for it.
IROC99
New member
- 49
- 0
- 0
- Location
- Marion/South Carolina
I am considering that myself. Is that the transmission out of a newer K-5?
I will be looking for those old info posts also.
IROC99
I will be looking for those old info posts also.
IROC99
WARWAG
Active member
- 1,487
- 22
- 38
No. The later versions were 4l60E 4l65E and were electronically controlled. The 700R4 did not need a computer to work. BUT to make the 700R4 bullet proof parts are swapped out of the 4l65E. Do a search and you will find all you need to know. I will be doing this swap but it will be one of the last things I do on this build.
rnd-motorsports
New member
- 905
- 4
- 0
- Location
- Evart,Michigan
Just talked about the 700r into the diesel 700r4 torque converter lock up Search is a wonderful thing!! 
- 34,012
- 1,807
- 113
- Location
- GA Mountains
It is best to find a donor vehicle that had a 6.2 in it. There are some diesel specific linkage parts for the TV cable you will need. Input shaft of the current transfer case will need swapped as well. The adapter compensates for the longer tranny case so driveshaft mods usually aren't required.