• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

8.3L Hydraulic Pump Add

74M35A2

Well-known member
4,145
311
83
Location
Livonia, MI
For any wanting to add hydraulics to their 8.3L vehicle, I wanted to illustrate another way. You can use a belt clutch hydraulic pump on the factory serpentine drive. Simply mount the pump in place of the A/C compressor of the kit. Pump has fittings on sides and rear, can use either or combo. Can actuate anytime, regardless of driving, stuck, neutral or drive, etc.....

69D3A4F5-FDE4-4DCD-BB0E-7121128FAEF9.jpeg
F4D46BCE-74D9-407B-8712-6FD5038F1F78.jpeg
F832A80C-8621-45BA-8F71-E4822C538126.jpeg
A8B24E33-44CF-430A-A3FA-189AC5C13CED.png
 

74M35A2

Well-known member
4,145
311
83
Location
Livonia, MI
Looks like a neatly done install. What is flow of your pump and what are you driving with it?
Thanks. I can’t say what I’m using them for because I’ve applied for a patent on it, but I can run the model numbers through Munice’s website and publish their specs. You can get 24v and V belt clutches as well.
 

74M35A2

Well-known member
4,145
311
83
Location
Livonia, MI
Here is the page, up to 11GPM @ 1,000rpm. So just a bit under the 925 max rating of 25GPM @ 1800rpm, but you can spin this one even faster and out-flow it if you need to.

 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks