I have an 802a with issues I the motor and generator head are in great shape. Tired of chasing electrical issues with it. Is there a thread that in detail explains how to strip it of all the BS? Forgive my terminology but I just want to turn a key and put out electricity sort of like a light tower generator. Just motor, key start, prob V regulator.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
802a
- Thread starter mlaxton
- Start date
Scoobyshep
Well-known member
- 1,296
- 1,937
- 113
- Location
- Florida
currently no, Its not impossible. You will need a regulator to keep voltage stable. you need something to govern the engine (unless you dont care about frequency drift)
- 2,582
- 2,272
- 113
- Location
- Efland, NC
What issues are you having? Has the unit ever worked correctly?
It did and I have a prior thread about it from almost a couple years ago now that the unit has been sitting. How could I tag you in it?
- 17,202
- 25,449
- 113
- Location
- Burgkunstadt, Germany
Do you mean this one?
MEP-802A No Response to Control Panel Functions Including Start Switch
I'd suggest hooking you voltmeter to meter M7 terminal I. The I should be embossed in the case of the meter by the terminal. Connect the meter negative to chassis ground. There is a ground stud on the right corner on the front panel. Start the set and monitor the voltage on that M7 terminal...
www.steelsoldiers.com
- 17,202
- 25,449
- 113
- Location
- Burgkunstadt, Germany
Well, actually, the old thread was not "Your" Thread. You and 2 others hijacked it several years ago. So to keep people from having to read 10,000 posts that have nothing to do with your gen set, please start here in this thread. The old thread will only bring confusion.
- 2,582
- 2,272
- 113
- Location
- Efland, NC
@mlaxton, give us the rundown of the current problems?
Not being snarky here, but if you have to ask, you'd be better off fixing the existing system or paying someone to retrofit it for you.
A Mebay DC30D generic generator controller would get you nearly all the funtionality of the MEP-802a panel plus autostart if it was hard wired for a single mode like 120/240V