scottmandu
Active member
- 822
- 35
- 28
- Location
- Texas
So here beings my quest to install A/C into my 95 LMTV. Today I got the crank pulley nearly installed.
![2016-06-05 15.24.52.jpg 2016-06-05 15.24.52.jpg](https://www.steelsoldiers.com/data/attachments/427/427724-896608027088176eb3915f0abd9bbc4d.jpg)
![2016-06-05 15.24.39.jpg 2016-06-05 15.24.39.jpg](https://www.steelsoldiers.com/data/attachments/427/427725-f6df9cefbda4f4f0bc42b1a68320da86.jpg)
![2016-06-05 14.58.01.jpg 2016-06-05 14.58.01.jpg](https://www.steelsoldiers.com/data/attachments/427/427726-b2b5123874642a84c541f8cbef8a46d5.jpg)
![2016-06-05 16.26.28.jpg 2016-06-05 16.26.28.jpg](https://www.steelsoldiers.com/data/attachments/427/427721-b29cb03a419a6e04f195920fe9861ae8.jpg)
![2016-06-05 15.44.33.jpg 2016-06-05 15.44.33.jpg](https://www.steelsoldiers.com/data/attachments/427/427723-be6ef69db9331267bc18d6dfd47ee077.jpg)
However the existing bolts were about 5mm too short so tomorrow I plan to get the proper bolts and finish the install.
It's also a great time to clean up and re lube the fan clutch.
![2016-06-05 15.24.52.jpg 2016-06-05 15.24.52.jpg](https://www.steelsoldiers.com/data/attachments/427/427724-896608027088176eb3915f0abd9bbc4d.jpg)
![2016-06-05 15.24.39.jpg 2016-06-05 15.24.39.jpg](https://www.steelsoldiers.com/data/attachments/427/427725-f6df9cefbda4f4f0bc42b1a68320da86.jpg)
![2016-06-05 14.58.01.jpg 2016-06-05 14.58.01.jpg](https://www.steelsoldiers.com/data/attachments/427/427726-b2b5123874642a84c541f8cbef8a46d5.jpg)
![2016-06-05 16.26.28.jpg 2016-06-05 16.26.28.jpg](https://www.steelsoldiers.com/data/attachments/427/427721-b29cb03a419a6e04f195920fe9861ae8.jpg)
![2016-06-05 15.44.33.jpg 2016-06-05 15.44.33.jpg](https://www.steelsoldiers.com/data/attachments/427/427723-be6ef69db9331267bc18d6dfd47ee077.jpg)
However the existing bolts were about 5mm too short so tomorrow I plan to get the proper bolts and finish the install.
It's also a great time to clean up and re lube the fan clutch.
Attachments
-
61.2 KB Views: 52
-
38.3 KB Views: 48
Last edited: