Ronmar
Well-known member
- 3,845
- 7,474
- 113
- Location
- Port angeles wa
Where are the 12 and 24v ignition relays K1 and K2 physically located on the A1R?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
A1R ignition relays
- Thread starter Ronmar
- Start date
- 6,861
- 696
- 113
- Location
- Stratford/Connecticut
Under the panel there are the 2 larger relays. The power cables from the polarity box connect to them.
Ronmar
Well-known member
- 3,845
- 7,474
- 113
- Location
- Port angeles wa
Passenger side? That was what I suspected, but the person I am helping troubleshoot a problem didn’t see them there…
- 3,748
- 1,521
- 113
- Location
- North Carolina - FINALLY !
These?
Ronmar
Well-known member
- 3,845
- 7,474
- 113
- Location
- Port angeles wa
The one in the bottom of the pic is a bussman 40A circuit breaker like the one in the link below. Not sure what the one in the top is(might be a diode pack), but the wire TL numbers you gave are not associated with the ign relays…
Bussman Boat Circuit Breaker 184110F | 110 Amp
Boat part number 1069089 is a new circuit breaker manufactured by BUSS, part number 184110F .
www.greatlakesskipper.com
Ronmar
Well-known member
- 3,845
- 7,474
- 113
- Location
- Port angeles wa
Thanks! Someone sent me a great pic, they are right under the PDM boxes accessed from the top of the PDP area…