autigers35a3
New member
- 111
- 1
- 0
- Location
- Auburn, Alabama
Away from the truck tonight working. Trying to find lug nuts online. Size anyone? Thanks...
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
A3 lug nut size???
- Thread starter autigers35a3
- Start date
BadMastard
New member
- 392
- 5
- 0
- Location
- Duvall, Wa.
rim nuts are 1 1/8, lug nuts should be 1 1/2.
- 1,425
- 38
- 48
- Location
- Winter Haven, florida
The lug nut is 3/4" N.F. right and left thread, socket size is 1 1/2".
CobraCDR
New member
- 316
- 2
- 0
- Location
- Twin Cities, MN
Does everyone just hand crank these on tight or get them set to the proper torque?
DUECE-COUPE
Member
- 357
- 5
- 18
- Location
- Scurry. Tx
hand tight, clock the bar to allow feet and leg access, tighten again using your weight with one foot on the bar, recheck at 5 miles, and again at 10 miles. Lug nut checks are part of the PMCS, so you should never find yourself on the side of the road missing a tire and wheel unless you have a catastrophic hub failure.
CobraCDR
New member
- 316
- 2
- 0
- Location
- Twin Cities, MN
True, you should notice anything loose. The specified torque on this is almost 500 ft-lbs, hard to even find a torque wrench that will get it that tight.
motomacguyver
New member
- 269
- 5
- 0
- Location
- Eau Claire, Wi. USA
When I took my A3 to the tire dealer for some new O rings and valve stem grommets, they torqued the lug nuts to a full 500 ft lbs. I use a three foot cheater pipe on a 20" breaker bar and go about as tight as I can.