After market seats or alternate seats for HMMWV / m998 ?

[Sintorion]

Has anybody used the rear captain seats out of a caravan? Guy on eBay sells four for like $380.

Seriously? Did you look through this thread?

 

[11C 31A]

Actually I did and most refer to a Pacifica. I was asking about take outs from a caravan. They seem to be different seats to me.

 

[Gear Report]

Actually I did and most refer to a Pacifica. I was asking about take outs from a caravan. They seem to be different seats to me.

Same questions here. There is a wrecked 2005 Caravan near me with leather seats. The whole van is $400. Thinking of buying it just for the seats, then taking the rest of it to the scrap yard.
I've been scouring the internet for measurements on Caravan seats, but not found any yet.

BTW, someone mentioned earlier, here's the article on seat options for HMMWVs http://gear-report.com/hmmwv-upgrade-aftermarket-seats-for-humvee

 

[11C 31A]

Gear Report, I went ahead and bought the caravan seats and the fit just fine. Had to Fab a riser for the drivers seat thought. Mine came out of the second row captains seat of a 2017 I believe.

 

[Gear Report]

Gear Report, I went ahead and bought the caravan seats and the fit just fine. Had to Fab a riser for the drivers seat thought. Mine came out of the second row captains seat of a 2017 I believe.

Awesome. Thanks.

 

[FirstGen FBody]

any one know where to get mastercraft military seats?

 

[BLK Beast]

View attachment 673307View attachment 673308
I build and upgrade Hummers and Hmmwvs, I always remove that bar. I put on Rock protectors from hummer h1, they look great and add protection to the underside for mudding and and 4 wheeling.

Sully, I am in Fort Lauderdale, What is the best way to get in touch because I am in process of rebuilding a humvee 1123 A2

 

[wheelspinner]

any one know where to get mastercraft military seats?

Fixed or flip up? I'm tapped out on fixed but have 4 flip ups aailable

 

[Monkeyboyarmy]

If anyone has stock seats that they want to get rid of, let me know. Need 4 for a 1123.

 

[osteo16]

Corona has kicked in... The isolation is real. Excuse my rant..

 

[Monkeyboyarmy]

Selling seats to fund new seats might be of interest to one of these guys. Pretty strong language never the less.

 

[TOBASH]

Corona has kicked in... The isolation is real. Excuse my rant..

I liked your rant, but I understand your edit.

Stay safe. Stay healthy. Stay sane.

 

[Aurora]

If anyone has stock seats that they want to get rid of, let me know. Need 4 for a 1123.

I have 2 black high backs from an H1 if your interested ? I converted mine to a four man and wanted all seats to match.


Sent from my iPhone using Tapatalk

 

[Mogman]

I got my Smittybilt seats off of Fleabay for 89.00 ea. shipped, not as durable as the military seats but look like they will do OK

 

[BLK Beast]

View attachment 673307View attachment 673308
I build and upgrade Hummers and Hmmwvs, I always remove that bar. I put on Rock protectors from hummer h1, they look great and add protection to the underside for mudding and and 4 wheeling.

What is your location and name of your shop?

 

[BLK Beast]

Jays is the guy's name (not sure if it is short for Jason) but he has two main types of seats available, those from a 2017 Chrysler Pacifica and from 2016 Chrysler Pacificas. He gets these from a local shop that does handicap conversions on vans and they gut the second row seats for the conversion. I have installed the 2017 seats in 4 Humvees now and they work great. The 2017 seats require support bars and bolts to be welded on to the seat frame. I've got a local fab shop in Yuma that does it for $20 a seat - super cheap and they do a great job. The 2016 seats have a sliding bracket that has the mounting bolts already in the bracket and they do not require welding of support brackets. When it comes to the passenger seat over the battery box, I have purchased the seat stiffener plate used for the commander seats and mount the seats to the lid. The seats fold flat and are super easy to remove from the passenger seat and rear seats (these bolt right up to the seat box lids in the back). I have posted pics earlier in this thread of the fab work for the welding of the support brackets and bolts on the seats. If you use the right type of welder, you don't have to take the seat apart to avoid the sparks from melting the material. I can post some additional pics later this week when I install another set of seats in another Humvee.

Any contact information of this guy???

 

[Tallerthanuthink]

Read through the older posts and didn’t see any clarifications or info: has anyone put in the MRAP/GIS Cobra seats for replacing the front seats in an M998? Can you share some pics and how you got them to fit? If you have them mounted, how do you like them for extended rides? Here’s a pic of the seats I’m asking about.

 

[thoner7]

Has anyone tried a seat similar to the Smittybuilt- but with a headrest? Bad neck and back demands a headrest!

 

[Gcelevator]

Has anyone tried a seat similar to the Smittybuilt- but with a headrest? Bad neck and back demands a headrest!

Check these out of ebay.

 

[Ajax MD]

Sorry to dredge this up again. Are these Smittybuilt seats high back or midback? It's hard to tell from the photo. I'm looking for neck protection in a rear-ender type of scenario.