-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Aftermarket fuel filters + base
- Thread starter ICAT
- Start date
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
A search of spin on filters should net you hours of reading.
Cleptomaniac
Active member
- 1,083
- 1
- 38
- Location
- Tecumseh ,OK
Yes I used a after market filter and base from Napa for my primary fuel filter.
But I think that is the only off the shelf base you can do that with. The rest you have to get the spin on kits from one of the members here.
Sorry I have no pictures I'm out of state. But their is a thread with it on here some where.
But I think that is the only off the shelf base you can do that with. The rest you have to get the spin on kits from one of the members here.
Sorry I have no pictures I'm out of state. But their is a thread with it on here some where.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Why would you say that? The stock filter bases for the secondary and final filters are just bolted to the side of the block. Nothing special about them either.
Cleptomaniac
Active member
- 1,083
- 1
- 38
- Location
- Tecumseh ,OK
Did you use or have any pics of this done with standard filter bases? I would love to put spin on filters on the rest of my truck.
- 8,539
- 2,758
- 113
- Location
- Monrovia, Ca.
Jatonka sells them.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
I'm pretty sure Westech posted a thread bout his filter replacement. Let me see if I can find it.
Looks like he deleted it when his "aunt flo" visited one time. Maybe a mod can bring it back.
Looks like he deleted it when his "aunt flo" visited one time. Maybe a mod can bring it back.
Last edited:
Cleptomaniac
Active member
- 1,083
- 1
- 38
- Location
- Tecumseh ,OK
Thanks Gimpy I will look in to it when I get home next week. If it is a matter of two filter bases and some fittings I'm all in! The primary was very easy to do and was very nessasary in my case cause my main was leaking. Someone broke the drain 
So it was on the top of the list.
Will the ones Jtonka sell are adapters not bases. I think they are great and will do them on my oil filters but I am the type that likes to walk in and buy something and walk out!
Not the best trait but.... I have always hated buying any thing on the net. This hobby has forced that so I'm getting a little better
So it was on the top of the list.Will the ones Jtonka sell are adapters not bases. I think they are great and will do them on my oil filters but I am the type that likes to walk in and buy something and walk out!
Not the best trait but.... I have always hated buying any thing on the net. This hobby has forced that so I'm getting a little better
- 1,998
- 31
- 48
http://www.steelsoldiers.com/deuce/42523-another-spinon-primary-filter-install.html
You can get the base from NAPA or find one from WIX online. You will need to find the fittings for the fuel lines. It should not be too hard in a 'proper' hardware store, or you can get the kit at jatonkas
If you use Jatonkas kit, all ya gotta do is purchase filters after you do the mod.
I did the primary on my deuce, getting the base from NAPA. I'll be going to Jatonka for the Secondary filter setup.
You can get the base from NAPA or find one from WIX online. You will need to find the fittings for the fuel lines. It should not be too hard in a 'proper' hardware store, or you can get the kit at jatonkas
If you use Jatonkas kit, all ya gotta do is purchase filters after you do the mod.
I did the primary on my deuce, getting the base from NAPA. I'll be going to Jatonka for the Secondary filter setup.
cbvet
Active member
- 1,567
- 20
- 38
- Location
- Northwest (Knox) Indiana
You can reuse the old fittings.