chuck500cc
New member
- 310
- 2
- 0
- Location
- DFW Area
Need to know what has been used as a substitute to the wrench that is used to adjust the compressor belt? It shows a big spanner wrench.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Air Compressor tool
- Thread starter chuck500cc
- Start date
lacoda56
Member
- 775
- 7
- 18
- Location
- Rochester, Washington
Big channel lock pliers works too.
Chuck, do yourself a favor an get the right wrench, cause there's not much room and it makes the job so much easier. There are members on here that sell good remakes for very little $'s.
You'll need a 9/16th socket to loosen the two clamp bolts, the spanner for the front and a 1 13/16th" open end wrench, (a 1 7/8th" will work) for the back side of the pulley.
Clockwise tightens.....have fun.
You'll need a 9/16th socket to loosen the two clamp bolts, the spanner for the front and a 1 13/16th" open end wrench, (a 1 7/8th" will work) for the back side of the pulley.
Clockwise tightens.....have fun.