• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Air-O-Matic A2 versus A3 differences?

Gypsyman

Well-known member
Steel Soldiers Supporter
333
741
93
Location
Quincy, FL
In my search for an air assist kit for my new to me M35A2C I was told that the Air-O-Matic kit for an A3 will work on an A2 but some parts must be changed. I've read what little literature I can find and every thread I've run across. I see no mention of the differences.

Is there any chance that someone could enlighten me as to the differences? If it must be an A2 kit how do I identify said beast?
 

M35A2-AZ

Well-known member
Steel Soldiers Supporter
3,222
392
83
Location
Tonopah, AZ
I think the kits are all for the A3 and it comes with all the mounts needed for the A2. You have to change the right U-Bolt/ spring plate.
If I remember right.
 

Gypsyman

Well-known member
Steel Soldiers Supporter
333
741
93
Location
Quincy, FL
That's the conclusion that I was coming to also. Not sure why the seller was stating that there were differences. I've run across a few used kits but most of them have damaged air cylinders.

The hunt continues...
 

frank8003

In Memorial
In Memorial
6,426
4,985
113
Location
Ft. Lauderdale, Florida


It's NSN is 2530-01-388-4240 and it's commercial part number
is 88902.
 

Gypsyman

Well-known member
Steel Soldiers Supporter
333
741
93
Location
Quincy, FL
I was reading the old thread about parts availability. Does anyone know of replacement cylinder seal (o-ring) availability? I tried Arthur (apbloom) but no reply.
 
Top