• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Air-o-matic regulator.

DHennon

Member
Steel Soldiers Supporter
364
16
18
Location
Orlando, Fl
Haven't posted for a while. I need some assistance I have a M35-A2 and installed an Air-o-Matic system 3 years ago, and has performed flawlessly. When I drove it yesterday, the low air buzzer kept going off. It appears the air regulator on the driver's frame rail is dumping air. I checked the SS site for info, but cannot locate where to obtain a new one. Any help would be appreciated.:)

DHennon
 

Floridianson

Well-known member
Steel Soldiers Supporter
7,390
2,439
113
Location
Interlachen Fl.
Believe most were leaving the regulator out of the system and just running full truck air pressure.
Now just a small water catch would be nice as the Deuce A2 did not have an air dryer. Nice upgrade.
 
Last edited:

m16ty

Moderator
Moderator
Steel Soldiers Supporter
9,576
210
63
Location
Dickson,TN
Yes, you can do without the regulator. Just take it off and run system pressure.
 
Top