• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

All weather protective enclosure for MEP 003

rosie

New member
Steel Soldiers Supporter
137
2
0
Location
Pittsboro, NC
Hello all, rather than re-invent the wheel, I was hoping to get advice from someone with a ground mounted MEP 003 that had built a utility bldg./enclosure that would keep the generator protected but still allow access for service. Also, does passive exhaust from the building work best or the use of fans. Pics would be especially nice. Any hints, information, plans, etc. most graciously appreciated, Many thanks.
 

dogkiller

Member
77
0
6
Location
frisco/tx
I mounted my mep 802a in a 20' conex box & ran underground cable to were I needed it
ducted the cooling air & exhaust out the side....
 

SCSG-G4

PSVB 3003
Steel Soldiers Supporter
5,370
3,383
113
Location
Lexington, South Carolina
If you want ideas, find the Kohler Power Systems TP-5700 document on the web. It is the Installation guide for industrial/Commercial/ and Residential Generator Sets. Lots of good info there, and probably some considerations that many folks had not considered.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks