An easier way to turbo an M800 truck

[US6x4]

Your workbench says this isn't your first rodeo...nice setup. I could use a converter like that - thanks for sharing

 

[JasonS]

Finished up the driver's side hood panel. I cut out a square comprising the factory hole where the intake passed through and will use it on the passenger side.


I used the hinges and latches from a spare deuce side cover to make this cover open. Not perfect but nothing on the truck is.

 

[US6x4]

Gonna use a plasma cutter?

 

[JasonS]

Plasma cutter is a little coarse for this. I start the cut with an abrasive cutoff wheel and finish with a reciprocating body saw. Nice cut and doesn't put all the cutoff dust in the air.