Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
18 is 2inches wider. 2 inches taller. Depth is near the same.
I checked with Warn winches. He advised me that some series 18 winches have shorter drums making them very close to the series 12 winches. My series 18 is about 1/4" longer in width. I would not have purchased this if it wasn't used on humvee's but again it was advertised for Hummer. Guess I should have done more research before trusting the ad as being correct. Thanks anyway for you input. I'll look for a tree.
Have you measured the space between your frame rail extensions yet?
No, The probem is that I just purchased the HMMWV from govPlanet and waiting for govt. approval. I was hoping someone else could take a measurement for me.
Maybe ask for dimension of space between the frame rail extensions instead of asking how much clearance around a winch that probably none of us have in the HMMWV?
I purchase a 2007 M1165A1. Unfortunately I already purchased the winch being advertised for a Humvee. The winch is working.
I can measure mine after lunch. I have an m1152a1.
Thanks, I appreciate it. That will definitely tell me if mine will work or not. If you can also get a measururement of the overall diameter space too that will help. Thanks again! Dennis
Thanks, The guy I bought this from now says he mounts one from his pintle. That of course means its hangs out. He problably advertises for HMMWV as he would not sell many if he stated series 18 for the MRAP vehicle. Not a bad deal for $1,000 if you can use it, oh well.
Shoot me a pm with what you want for it in cash. Picked up from you.
I want $1,500 cash with new 12' OEM remote. Before I purchased this the seller tested it. Works well. Where are you located.
I know the guy I had purchased the series 18 winch from was from Maryland. I believe he was purchasing his winches from auctions on the east coast south areas. Of course these came off larger vehicles and not humvees.
